Setting Root Access on Redmi: A Step-by-Step Guide

Enable Developer Options

Enabling Developer Options on your Redmi device is the first step towards gaining advanced control and customization. This feature provides access to various developer settings that are generally hidden from regular users. Here's a step-by-step guide to enabling Developer Options on your Redmi device:

Open Settings: Begin by unlocking your Redmi device and navigating to the "Settings" app. This can usually be found on the home screen or in the app drawer.
About Phone: Scroll down within the Settings menu and look for the "About phone" option. Tap on it to access detailed information about your device.
Build Number: In the "About phone" section, locate the "Build number" entry. This is where you'll need to perform a specific action to unlock the Developer Options.
Tap Build Number: Tap on the "Build number" entry repeatedly for about seven times. As you do this, you'll notice a message indicating that you are getting closer to becoming a developer.
Enter PIN/Password: Depending on your device's security settings, you may be prompted to enter your PIN or password to verify your actions. This is a standard security measure to prevent unauthorized access.
Developer Mode Activated: After tapping the "Build number" seven times and entering your PIN or password, you should see a message confirming that Developer Options have been enabled.

Enabling Developer Options on your Redmi device is a straightforward process that grants you access to a wide array of advanced settings. Once enabled, you'll be able to customize and optimize various aspects of your device, empowering you to personalize your Redmi experience according to your preferences.

By following these simple steps, you've successfully unlocked the Developer Options on your Redmi device, setting the stage for further customization and optimization. Next, you can proceed to enable USB debugging and delve into the world of advanced Android development and customization.

Remember, with great power comes great responsibility. While Developer Options offer exciting possibilities, it's important to exercise caution and refrain from making changes that could adversely impact the stability and security of your device. With the Developer Options now at your disposal, you're ready to explore the full potential of your Redmi device.

Enable USB Debugging

Enabling USB debugging on your Redmi device is a crucial step in gaining advanced access to the inner workings of your device. This feature allows your computer to communicate with your Redmi device, facilitating the transfer of data, debugging applications, and accessing certain privileged commands. Here's a comprehensive guide to enabling USB debugging on your Redmi device:

Open Settings: Begin by unlocking your Redmi device and navigating to the "Settings" app. This can usually be found on the home screen or in the app drawer.
Developer Options: Since you've already enabled Developer Options, you can now access this section within the Settings menu. Developer Options should appear above the "About phone" section.
USB Debugging: Scroll through the Developer Options and locate the "USB debugging" option. It's usually found under the "Debugging" or "Debugging tools" subsection.
Toggle USB Debugging: Tap on the "USB debugging" option to activate it. You may be prompted with a confirmation dialogue to verify your action. Proceed by tapping "OK" to enable USB debugging.
Connection Prompt: Upon enabling USB debugging, a prompt may appear on your device asking whether you trust the connected computer. This is a security measure to prevent unauthorized access. Tap "OK" to confirm your trust in the connected computer.

By following these steps, you've successfully enabled USB debugging on your Redmi device. This opens up a world of possibilities for advanced users and developers, allowing for seamless interaction between your device and a connected computer. With USB debugging activated, you can now proceed to perform a range of tasks, including debugging apps, accessing advanced developer tools, and even modifying certain system settings with the appropriate knowledge and caution.

It's important to note that USB debugging grants elevated privileges and should be used with care. While it offers tremendous flexibility and control, it also introduces potential risks if misused. Therefore, it's advisable to only enable USB debugging when necessary and to exercise caution when connecting your device to unknown or untrusted computers.

With USB debugging now active on your Redmi device, you're well-equipped to explore the full potential of Android development and customization. Whether you're a seasoned developer or an enthusiastic enthusiast, this feature empowers you to delve deeper into the inner workings of your device, unlocking a realm of possibilities for customization and optimization.

Install ADB and Fastboot on Your Computer

Installing ADB (Android Debug Bridge) and Fastboot on your computer is essential for interacting with your Redmi device at a low level. These versatile command-line tools enable you to communicate with your Android device, perform various tasks such as installing apps, debugging software, and even unlocking the bootloader. Here's a detailed guide to installing ADB and Fastboot on your computer, ensuring that you have the necessary tools to proceed with advanced customization and development tasks.

Windows:

Download Android SDK Platform Tools: Start by downloading the Android SDK Platform Tools from the official Android developer website. These tools include ADB and Fastboot, among other essential utilities for Android development.
Extract the Zip File: Once the download is complete, extract the contents of the downloaded zip file to a location on your computer. It's recommended to create a dedicated folder for the Android SDK Platform Tools for easy access.
Open Command Prompt: Navigate to the folder where you extracted the Android SDK Platform Tools. Hold down the Shift key, right-click within the folder, and select "Open command window here" from the context menu. This will open a command prompt window with the current directory set to the Platform Tools folder.
Test ADB and Fastboot: To ensure that ADB and Fastboot are working correctly, connect your Redmi device to your computer via USB. In the command prompt window, type "adb devices" and press Enter. If your device is detected, you should see its serial number displayed in the list of attached devices. Similarly, you can test Fastboot by typing "fastboot devices" in the command prompt after rebooting your device into Fastboot mode.

macOS and Linux:

Install ADB and Fastboot via Homebrew (macOS): If you're using macOS, you can install ADB and Fastboot using Homebrew, a popular package manager. Open the Terminal and run the command "brew install android-platform-tools" to install the necessary tools.
Install ADB and Fastboot via APT (Linux): For Linux users, you can install ADB and Fastboot using the APT package manager. In the Terminal, run the command "sudo apt install android-tools-adb android-tools-fastboot" to install the required utilities.

After successfully installing ADB and Fastboot on your computer, you're now equipped with powerful tools to interact with your Redmi device at a deeper level. These tools form the backbone of advanced Android development and customization, enabling you to perform a wide range of tasks and modifications with precision and control. Whether you're an aspiring developer or a seasoned enthusiast, having ADB and Fastboot at your disposal empowers you to explore the full potential of your Redmi device, opening up a world of possibilities for customization and optimization.

Unlock Bootloader

Unlocking the bootloader on your Redmi device is a pivotal step towards unleashing its full potential for customization and optimization. By unlocking the bootloader, you gain the ability to install custom firmware, root your device, and flash custom recovery such as TWRP (Team Win Recovery Project). This process grants you unprecedented control over your device, allowing you to push the boundaries of what your Redmi device can achieve. Here's a comprehensive guide to unlocking the bootloader on your Redmi device:

Backup Your Data: Before proceeding with unlocking the bootloader, it's crucial to back up all important data on your device. Unlocking the bootloader involves wiping the internal storage, which will result in the loss of all data. Therefore, ensure that you have a complete backup of your photos, videos, documents, and any other important files stored on your device.
Enable Developer Options and USB Debugging: As mentioned earlier, ensure that Developer Options are enabled on your device. Additionally, make sure that USB debugging is activated, as this will be necessary for the subsequent steps in the bootloader unlocking process.
Obtain Unlock Code: Xiaomi, the manufacturer of Redmi devices, requires users to obtain an unlock code to unlock the bootloader. To do this, visit the official Xiaomi Mi Unlock website and apply for the unlock code. The process may involve creating a Mi account and providing necessary details about your device.
Prepare Your Computer: Ensure that ADB and Fastboot are properly installed on your computer, as these tools will be used to communicate with your Redmi device during the bootloader unlocking process. Connect your device to your computer via USB and launch a command prompt or terminal window.
Boot Your Device into Fastboot Mode: With your device connected to your computer, reboot it into Fastboot mode. This can usually be done by powering off the device and then holding down specific hardware buttons while turning it back on. Once in Fastboot mode, your device should be recognized by the computer.
Unlock the Bootloader: In the command prompt or terminal window on your computer, enter the command to unlock the bootloader. This typically involves using the fastboot command along with the unlock code obtained from the Xiaomi Mi Unlock website. Follow the on-screen instructions to complete the bootloader unlocking process.
Reboot Your Device: After successfully unlocking the bootloader, reboot your device. You'll notice that the boot-up process now includes a warning message about the bootloader being unlocked. This indicates that your Redmi device is now ready for advanced customization and modification.

Unlocking the bootloader on your Redmi device is a significant milestone that opens up a world of possibilities for customization and optimization. With the bootloader unlocked, you can proceed to install custom recovery, gain root access, and explore a wide range of custom ROMs and modifications to tailor your device to your preferences. It's important to note that unlocking the bootloader may void your device's warranty and could potentially lead to security risks if not approached with caution. Therefore, it's essential to thoroughly research and understand the implications of unlocking the bootloader before proceeding.

Install TWRP Recovery

Installing TWRP (Team Win Recovery Project) on your Redmi device empowers you with a powerful custom recovery environment that facilitates advanced system modifications, backups, and restores. TWRP provides a user-friendly interface and robust functionality, making it an indispensable tool for enthusiasts and developers alike. Here's a comprehensive guide to installing TWRP Recovery on your Redmi device:

Download TWRP Image: Begin by obtaining the appropriate TWRP image file for your specific Redmi device model. Visit the official TWRP website or trusted XDA Developers forums to locate the TWRP image corresponding to your device. Ensure that you download the correct TWRP image to avoid compatibility issues.
Enable USB Debugging: As mentioned earlier, ensure that USB debugging is enabled on your Redmi device. This is essential for establishing a connection between your device and your computer, allowing for the transfer of the TWRP image and subsequent installation.
Connect Your Device: Connect your Redmi device to your computer via USB, ensuring that it's recognized and accessible from your computer. This connection will be necessary for transferring the TWRP image to your device and issuing commands via ADB and Fastboot.
Transfer TWRP Image: Once your device is connected, transfer the downloaded TWRP image file to the internal storage or SD card of your device. It's important to place the TWRP image in a location that is easily accessible from your device's file manager.
Boot into Fastboot Mode: With your device connected to your computer, boot it into Fastboot mode. This is typically achieved by powering off the device and then holding down specific hardware buttons while turning it back on. Once in Fastboot mode, your device is ready for the TWRP installation process.
Open Command Prompt or Terminal: On your computer, open a command prompt (Windows) or terminal (macOS, Linux) and navigate to the directory where the TWRP image file is located. This is where you'll issue the commands to install TWRP on your device.
Flash TWRP Image: In the command prompt or terminal window, enter the command to flash the TWRP image to your device. This typically involves using the fastboot command along with the specific filename of the TWRP image. Follow the on-screen instructions to complete the flashing process.
Reboot into TWRP: After successfully flashing the TWRP image, reboot your device into recovery mode. This can usually be done by issuing the appropriate command via ADB or Fastboot. Once in TWRP recovery, you'll be greeted by the intuitive TWRP interface, signaling the successful installation of TWRP on your Redmi device.

Installing TWRP Recovery on your Redmi device equips you with a versatile tool for advanced system management and customization. With TWRP at your disposal, you can create backups, flash custom ROMs, apply system modifications, and perform a wide range of tasks that transcend the limitations of the stock recovery environment. It's important to approach TWRP installation with caution and ensure that you're using the correct TWRP image for your device to avoid potential complications. With TWRP now installed, you're ready to explore the limitless potential of customizing and optimizing your Redmi device to suit your preferences.

Flash Magisk to Gain Root Access

Flashing Magisk to gain root access on your Redmi device is a pivotal step in unlocking the full potential of Android customization and system control. Magisk, a powerful and versatile tool, not only provides root access but also offers the ability to manage root permissions for individual apps, apply systemless modifications, and bypass various integrity checks implemented by Google's SafetyNet. Here's a comprehensive guide to flashing Magisk and harnessing the capabilities of root access on your Redmi device:

Prerequisites

Before proceeding with the Magisk installation, it's essential to ensure that your device meets the following prerequisites:

The bootloader of your Redmi device must be unlocked.
TWRP Recovery must be successfully installed on your device.
A backup of all important data on your device should be created to prevent potential data loss during the process.

Download Magisk

Begin by downloading the latest Magisk zip file from the official XDA Developers forum or the official Magisk website. It's crucial to obtain the correct version of Magisk that is compatible with your device and the Android version it's running.

Transfer Magisk Zip

Connect your Redmi device to your computer via USB and transfer the downloaded Magisk zip file to the internal storage or SD card of your device. Ensure that the Magisk zip file is placed in a location that is easily accessible from your device's file manager.

Boot into TWRP Recovery

With your device connected to your computer, boot it into TWRP Recovery mode. This can typically be achieved by powering off the device and then holding down specific hardware buttons while turning it back on. Once in TWRP Recovery, you're ready to initiate the Magisk flashing process.

Flash Magisk

In TWRP Recovery, navigate to the "Install" option and select the Magisk zip file that you transferred to your device. Swipe to confirm the flash, initiating the installation of Magisk on your device. Once the installation is complete, you can reboot your device.

Verify Root Access

After your device reboots, you can verify the successful installation of Magisk and gain root access by checking for the presence of the Magisk Manager app in your app drawer. Opening the Magisk Manager app should confirm that your device has been successfully rooted using Magisk.

By following these steps, you've successfully flashed Magisk to gain root access on your Redmi device, unlocking a world of possibilities for advanced system customization, app control, and systemless modification. With root access granted through Magisk, you're empowered to explore the full potential of Android customization, enabling you to tailor your device to your preferences and delve into the realm of advanced system modifications and optimizations.