How To Remove Links From Invicta Watch

Tools Needed

Before you begin the process of removing links from your Invicta watch, it’s important to gather the necessary tools. Having the right tools will make the task much easier and help avoid any potential damage to your watch. Here are the tools you will need:

Watch Link Remover Tool: This tool is designed specifically for removing links from watch bands. It usually consists of a small pin pusher and an adjustable base to hold the watch in place.
Microfiber Cloth: A microfiber cloth will come in handy for cleaning the watch band and ensuring that no scratches or smudges are left behind.
Small Hammer or Mallet: You may need a small hammer or mallet to gently tap the pin pusher and remove the link pins.
Small Needle or Pin: In case the link pins are stubborn and difficult to remove, a small needle or pin can be used to help push them out.
Watch Bracelet Holder: This optional tool helps to secure the watch bracelet in place while you remove the pins.
Tweezers: Tweezers can be useful for handling small parts and holding the link pins.

Make sure you have all these tools ready before you start the process. Having them on hand will save you time and frustration, and ensure that you can successfully remove the links from your Invicta watch.

Step 1: Measure Your Wrist

Before you begin removing links from your Invicta watch, it’s important to measure your wrist to determine how many links need to be removed. This step ensures that your watch will fit comfortably and securely on your wrist after the removal process. Here’s how to measure your wrist:

Wrap a flexible measuring tape around your wrist: Measure your wrist by wrapping a flexible measuring tape around the area where you want to wear your watch. Make sure the tape is snug but not too tight.
Record the measurement: Note down the measurement in inches or centimeters, depending on your preference. This will be the circumference of your wrist.
Add or subtract desired length: Decide how loose or tight you want your watch to fit. If you prefer a looser fit, add about 0.5 inches (1.3 cm) to your wrist measurement. If you prefer a tighter fit, subtract about 0.25 inches (0.6 cm) from your wrist measurement.

Once you have determined the desired length for your watch, you will have an idea of how many links you need to remove. Each link typically adds or subtracts around 0.5 inches (1.3 cm) from the length of the watch band.

It’s important to remember that removing too many links can result in a watch band that is too tight, while removing too few links can make the watch band loose. Therefore, it’s crucial to measure your wrist carefully and be mindful of how each link affects the overall fit of the watch.

By following this first step and accurately measuring your wrist, you will be well-prepared to proceed with the link removal process and ensure that your Invicta watch fits perfectly on your wrist.

Step 2: Gather Necessary Materials

Before you start removing links from your Invicta watch, it’s essential to gather all the necessary materials. This step will ensure that you have everything you need within reach, making the process smoother and more efficient. Here are the materials you will need:

Watch Link Remover Tool: This is the primary tool you will use to remove the links from your watch band. It typically consists of a small pin pusher and an adjustable base to hold the watch in place.
Microfiber Cloth: It’s important to have a microfiber cloth handy to clean the watch band and prevent scratches or smudges.
Small Hammer or Mallet: You may need a small hammer or mallet to gently tap the pin pusher and remove the link pins.
Small Needle or Pin: In case the link pins are stubborn or difficult to remove, having a small needle or pin can help you push them out more easily.
Watch Bracelet Holder (optional): A watch bracelet holder is a useful tool that can help secure the watch bracelet in place while you remove the pins.
Tweezers: It’s always handy to have a pair of tweezers nearby. They can assist in handling small parts and holding the link pins as you remove them.

By having these materials ready, you can confidently proceed with the link removal process without any interruptions. It’s always better to be prepared and have all the tools within easy reach.

Keep in mind that using the correct tools and materials will help ensure that you can safely remove the links from your Invicta watch without causing any damage.

Now that you have gathered the necessary materials, you’re ready to move on to the next step, where you will identify the links to be removed.

Step 3: Identify the Links to be Removed

After measuring your wrist and gathering the necessary materials, the next step in removing links from your Invicta watch is to identify which links need to be removed. This step ensures that you remove the correct links to achieve the desired fit. Follow these steps to identify the links:

Inspect the links: Take a close look at the watch bracelet and identify the type of links it consists of. Invicta watches typically have two types of links: regular links and removable links. The removable links are usually marked with arrows or small holes.
Count the number of removable links: Now that you’ve identified the removable links, count how many you need to remove based on the measurement you obtained in Step 1. Remember that each removable link typically adds or subtracts around 0.5 inches (1.3 cm) from the length of the watch band.
Mark the links: Using a small and discreet marker, mark the removable links you need to remove. This will serve as a guide during the link removal process.

By carefully inspecting and marking the removable links, you ensure that you don’t accidentally remove the wrong links. This step helps maintain the integrity of your Invicta watch bracelet and ensures that you achieve the desired fit without any guesswork.

Once you have identified and marked the links to be removed, you’re ready to move on to the next step, where you will position the watch properly for link removal.

Step 4: Position the Watch Properly

Now that you have identified the links to be removed, the next step in removing links from your Invicta watch is to position the watch properly. Proper positioning ensures stability and ease during the link removal process. Follow these steps to position the watch:

Place a soft cloth or watch holder: Lay a soft cloth or use a watch holder to protect the watch face and ensure it doesn’t get scratched or damaged during the link removal process.
Secure the watch: Depending on the design of your watch link remover tool, use the adjustable base or bracket to secure the watch in place. Make sure it is positioned securely and won’t slip or move during the link removal process.

Positioning the watch properly is crucial to avoid any accidental damage or slippage while removing the links. It provides stability and allows you to have better control during the process.

By taking the time to position the watch correctly, you can proceed with confidence to the next step, where you will learn how to remove the link pins.

Step 5: Remove Link Pins

With the Invicta watch positioned properly, it’s time to remove the link pins. This step requires careful precision to successfully detach the links from the watch band. Follow these steps to remove the link pins:

Locate the pin holes: Examine the links that need to be removed and locate the small holes on each side of the link. These pin holes are where the link pins are inserted.
Align the pin pusher: Take your watch link remover tool and align the pin pusher with the hole on the link pin you want to remove. Make sure the tool is properly aligned and securely in place.
Gently push out the pin: Apply steady and gentle pressure with the pin pusher, pushing the link pin out in the direction of the arrow or hole until it is fully dislodged. Be cautious and ensure that the pin doesn’t become stuck halfway or fall out completely.
Remove the link pin: Once the link pin is partially or fully pushed out, use a pair of tweezers or your fingers to carefully remove it from the link. Set it aside in a safe place.
Repeat for other link pins: Repeat the same process for each link pin that needs to be removed. Take your time and be patient to avoid any damage to the watch or the link pins.

Removing the link pins requires precision and a steady hand. Avoid applying excessive force or rushing the process to prevent any unintended damage to the watch band or the pins themselves.

By following these steps, you can successfully remove the desired links from your Invicta watch and achieve the desired fit.

Once all the necessary link pins have been removed, you can proceed to the next step, where you will learn how to reassemble the watch.

Step 6: Reassemble the Watch

After removing the desired link pins, it’s time to reassemble your Invicta watch. This step involves carefully putting the watch band back together to ensure a secure and comfortable fit. Follow these steps to reassemble the watch:

Align the links: Make sure the links are properly aligned and positioned before reinserting the link pins. This ensures that the watch band will fit seamlessly when reassembled.
Insert the link pins: Take the link pin you removed earlier and insert it into the pin holes of the adjacent links. Use gentle pressure to slide the pin back into place, making sure it goes through both holes securely. You may need to use the pin pusher or a small hammer to gently tap the pin into place if it’s not fitting smoothly.
Verify the fit: After reassembling a few links, try on the watch to ensure it fits properly. If it feels too tight or too loose, you may need to remove or add additional links. Make any necessary adjustments until you achieve the desired fit.

Throughout the reassembly process, be cautious not to force the link pins or damage the watch band. Take your time and ensure that each link is securely fastened before moving on to the next one.

Once you have reassembled the watch and verified the fit, congratulate yourself on successfully removing the links from your Invicta watch!

However, in some cases, removing the links by yourself may not be feasible due to the complexity of the watch band or lack of proper tools. In such instances, consider seeking professional help to ensure proper adjustments without risking any damage to your watch.

Alternative Option: Seek Professional Help

If you find the process of removing links from your Invicta watch too daunting or if you lack the necessary tools and expertise, it may be best to seek professional help. Watch professionals have the knowledge and experience to handle delicate timepieces like Invicta watches without compromising their quality or functionality. Here are a few reasons why seeking professional help may be a favorable alternative:

Precision and expertise: Professional watchmakers have a deep understanding of the intricate mechanisms and construction of luxury watches. They can accurately assess the number of links to remove and perform the modifications with precision.
Specialized tools and equipment: Watch professionals have access to specialized tools and equipment designed specifically for removing links and making adjustments to watch bands. This ensures that the process is carried out smoothly and without risk of damaging your valuable timepiece.
Preserving the watch’s integrity: Invicta watches are crafted with precision and attention to detail. By entrusting the link removal to a professional, you can be confident that the watch’s integrity and aesthetics will be maintained throughout the process.
Warranty considerations: If your Invicta watch is still under warranty, attempting to remove the links yourself could potentially void the warranty. Seeking professional help ensures that any necessary adjustments are made while maintaining the warranty coverage.

When choosing a watch professional, look for reputable watch repair shops or authorized service centers that specialize in luxury watch brands like Invicta. Ensure that they have a track record of expertise and customer satisfaction.

While seeking professional help may involve additional cost, the peace of mind that comes with knowing your watch is in the hands of an experienced professional is well worth it.

Consider this alternative option if you prefer the assurance of a professional’s expertise in handling your Invicta watch, ensuring that the link removal process is carried out flawlessly.