How To Open Invicta Watch

Tools Required

Opening an Invicta watch may seem like a daunting task, but with the right tools, the process becomes much simpler. Before you begin, make sure you have the following tools on hand:

Case opener tool: This specialized tool is designed to fit the notches or slots on the case back of your Invicta watch. It allows you to safely and easily remove the case back without causing any damage.
Case holder or cushion: This tool helps to secure the watch in place while you work on it. It ensures that the watch remains stable and prevents any accidental slipping or scratches.
Gloves: Wearing gloves while handling your watch can help protect it from fingerprints, scratches, and oils from your skin. Opt for lint-free gloves to avoid leaving any residue on the watch’s surface.
Cleaning cloth: A microfiber cloth or any lint-free cloth is essential to wipe the watch and keep it clean throughout the process. It allows you to remove any dirt, dust, or debris that may accumulate while working on the watch.
Tweezers: Tweezers can be handy for small, intricate parts or for holding screws in place. They provide better control and precision during the disassembly and reassembly process.
Small screwdriver set: A set of small screwdrivers with different sizes and tips will be necessary for removing screws from the watch’s case. Be sure to use the appropriate screwdriver for each screw to avoid stripping or damaging them.

Having these tools ready before attempting to open your Invicta watch will ensure a smooth and successful process. Remember to handle the tools with care and follow the instructions provided with each tool to ensure the safety of your watch.

Step 1: Remove the Watch Strap

Before you can open the Invicta watch, you need to remove the watch strap. Follow these steps:

Hold the watch securely in your non-dominant hand to ensure stability.
Locate the pins or screws that attach the strap to the watch case. These can usually be found on either side of the case where the strap meets the lugs.
For watches with pins: Use a small tool like a spring bar tool, push pin, or penknife to compress the spring bar. Insert the tool into the small hole on the side of the lug, and carefully apply pressure to release the spring bar. Once released, slide the strap off the lug.
For watches with screws: Use a small screwdriver that matches the screw head size and unscrew the screws on both sides of the strap. Once the screws are loosened, gently pull the strap away from the case.
Repeat these steps for the other side of the watch strap.

Removing the strap will expose the case back, making it easier for you to proceed to the next steps of opening your Invicta watch. Keep the watch strap in a safe place to avoid misplacing or damaging it during the process.

Step 2: Locate the Case Back

After removing the watch strap, your next step is to locate the case back of your Invicta watch. The case back is the part of the watch that covers the inner components and can be removed to access the internal mechanisms. Here’s how to find it:

Turn the watch over and examine the back. Look for a smooth, slightly recessed area with no visible screws or buttons.
Inspect the edges of the watch case. In most Invicta watches, the case back is a separate piece that fits securely onto the main case. It may have notches or indentations that indicate it can be opened.
Some Invicta watches have a transparent or exhibition case back, allowing you to see the movement without opening the watch. In this case, you won’t need to open the case back unless you require access to the internal components.

It’s important to note that not all Invicta watches have a removable case back. Some models have sealed or screw-down case backs, which require professional tools and expertise to open. If you’re unsure about whether your watch has a removable case back or not, it’s best to refer to the instruction manual or consult a professional watchmaker for assistance.

Once you have located the case back, you’re ready to move on to the next step of opening your Invicta watch.

Step 3: Choose the Appropriate Tool

When it comes to opening an Invicta watch, using the right tool is crucial to ensure a safe and successful process. Here’s how to choose the appropriate tool:

Consider the type of case back: Invicta watches can have different types of case backs, such as snap-on, screw-down, or press-fit. Each type requires a specific tool for removal.
For snap-on case backs: Look for a case opener tool that has multiple adjustable prongs or pins. This type of tool can fit into the notches or slots on the case back and provide leverage to pop it open.
For screw-down case backs: You’ll need a case wrench or a strap wrench. These tools have adjustable jaws that can securely grip the case back, allowing you to unscrew it in a clockwise direction.
For press-fit case backs: A case knife or a case opening tool with a thin, flat blade is ideal. This tool enables you to pry open the case back without causing damage to the watch or injuring yourself.

It’s important to choose a tool that is specifically designed for watch case backs to ensure a proper fit and minimize the risk of slippage or scratching. Avoid using improvised tools like sharp knives, screwdrivers, or coins, as they can cause damage to the watch and compromise its water resistance.

If you’re unsure about which tool to use for your Invicta watch, refer to the instruction manual or consult a professional watchmaker for guidance. Having the right tool will make the process of opening your Invicta watch much smoother and safer.

Step 4: Insert and Turn the Tool Counterclockwise

Now that you have chosen the appropriate tool for your Invicta watch, it’s time to proceed with opening the case back. Follow these steps:

Hold the watch securely in your non-dominant hand to ensure stability.
Insert the tool into the notches, slots, or grooves on the case back. Make sure the tool fits securely into the designated area.
Apply slight downward pressure to ensure a firm grip on the case back.
With the tool in place, turn it counterclockwise (or anti-clockwise) to loosen the case back. Use gentle, steady force, being careful not to exert excessive pressure that could damage the watch.

It’s important to note that some Invicta watches have left-hand threads, which means you would need to turn the tool clockwise to loosen the case back. Be sure to check the instruction manual or research the specific model of your watch to determine the correct direction of turning.

While turning the tool, you may feel a slight resistance or hear a click as the case back starts to loosen. This is an indication that you are on the right track. Continue turning the tool until the case back is completely unscrewed or released from the watch case.

If you’re having difficulty turning the tool or encountering excessive resistance, avoid forcing it. Take a moment to reassess the tool position and make sure it is properly aligned with the case back before attempting to turn it again. If necessary, seek assistance from a professional watchmaker to prevent any potential damage to your watch.

Step 5: Gently Pry Open the Case Back

After you have loosened the case back using the appropriate tool, it’s time to carefully pry open the case back of your Invicta watch. Follow these steps:

With the tool still inserted into the notches or slots on the case back, use your fingers or a case opening tool to gently pry open the case back.
Apply consistent and gentle pressure around the edges of the case back to slowly separate it from the watch case. Avoid using excessive force or applying pressure in a single spot, as this can damage the case back or the watch itself.
Work your way around the entire circumference of the case back, steadily prying it open as you go. Take your time and be patient during this process to prevent any accidental slips or mishaps.
If necessary, rotate the watch while keeping the tool in place to ensure even pressure distribution and a gradual opening. This can help prevent the case back from getting stuck or misaligned.

As you pry open the case back, you may hear a popping sound or feel a slight resistance. This is normal, as the case back is designed to fit snugly onto the watch case. Take care not to scratch or damage the case back or the watch’s surface during this step.

If you encounter any difficulties or the case back seems impossibly tight, it’s advisable to seek professional assistance rather than persisting and risking damage to your watch.

Once the case back is partially lifted, you can move on to the next step of removing it completely to access the inner components of your Invicta watch.

Step 6: Remove the Case Back

With the case back partially lifted, it’s time to fully remove it to gain access to the inner components of your Invicta watch. Follow these steps:

Continue prying open the case back until it is completely separated from the watch case.
Gently lift the case back away from the watch, taking care to hold it securely and avoiding any sudden movements that could cause it to slip and fall.
Set the case back aside in a safe and clean location, ensuring that it won’t be damaged or contaminated during the rest of the process.

As you remove the case back, you may notice a gasket or sealing ring around the edges. This rubber or silicone component helps to provide water resistance and protect the internal components of the watch. Take care not to damage or displace the gasket, as it plays a vital role in maintaining the watch’s water resistance.

While the case back is off, it’s a good opportunity to inspect the gasket for any signs of damage or wear. If necessary, clean or replace the gasket to ensure optimal water resistance and protection for your watch.

With the case back removed, you now have a clear view of the inner workings of your Invicta watch. Take the necessary precautions to keep the watch and its components safe from any debris, dust, or contaminants during the remainder of the disassembly or maintenance process.

Step 7: Access the Inner Components

Now that you have successfully removed the case back of your Invicta watch, you can begin to access and work with the inner components. Here’s how:

Take a moment to familiarize yourself with the layout of the watch’s internal components. Observe the movement, the dial, hands, and any other parts that may require attention.
If you are performing a specific task, such as replacing the battery or adjusting the hands, follow the appropriate instructions for that particular task. Refer to the watch’s manual, online resources, or seek guidance from a professional if needed.
Use the necessary tools, such as tweezers or screwdrivers, to carry out the desired task. Handle the components with care and precision, ensuring not to apply excessive force that could cause damage or misalignment.
Take note of the positions and orientations of the components as you make adjustments or perform maintenance. This will ensure proper reassembly later on.
Keep the work area clean and organized to avoid any accidental loss or mix-up of the watch’s components. Utilize a soft, lint-free cloth to wipe away any debris or fingerprints as you work.

During this step, it’s important to exercise caution and delicate handling. Watch components are delicate and can be easily damaged if not handled properly. If you are unsure about any particular aspect or encounter unexpected difficulties, seek professional assistance to avoid any unintended harm to your watch.

Once you have completed the necessary tasks or maintenance on the inner components, you can proceed to the final step of reassembling your Invicta watch.

Step 8: Reassemble the Watch

After completing the necessary tasks or maintenance on the inner components of your Invicta watch, it’s time to reassemble it. Follow these steps:

Ensure that all the components, including the movement, dial, hands, and any other parts, are clean, undamaged, and in the correct position.
Double-check the alignment and orientation of the components to ensure they are properly positioned for reassembly. Consult the watch’s manual or seek professional guidance if needed.
Take the previously removed case back and ensure it is clean and free of any debris or dirt.
Gently align the case back with the watch case, making sure it fits snugly and aligns with any notches or grooves.
Apply slight downward pressure and slowly rotate the case back clockwise to thread it back onto the watch case. Be cautious not to overtighten or cross-thread the case back.
Continue rotating until the case back is securely tightened. Use the appropriate tool in reverse to lock the case back in place, if necessary.

During the reassembling process, it’s important to handle the watch and its components with care to avoid any scratches, misalignments, or other potential damages. Take your time and be patient to ensure a proper and secure fit of the case back.

Once the watch is reassembled, take a moment to inspect it and verify that all the functions are working correctly. Set the time and any other desired settings, and ensure that the watch is running smoothly.

Congratulations! You have successfully reassembled your Invicta watch and completed the process of opening and accessing its inner components. Well done!

Remember, if you encounter any difficulties or are not comfortable with the reassembling process, it’s always best to seek professional assistance to ensure the integrity and functionality of your watch.