Stokke Tripp Trapp: How To Remove Tray


Locate the Release Button

Removing the tray from your Stokke Tripp Trapp chair is a simple process that starts with locating the release button. The release button is usually located on the underside of the tray, near the front edge. It may be a small indentation or a raised button that you can easily press with your fingers.

To find the release button, carefully turn over the tray and examine the underside. You may need to tilt the chair to get a better view. Look for any markings or instructions that indicate the location of the button. Once you have identified the release button, you are ready to proceed with removing the tray.

The location of the release button may vary slightly depending on the model and version of the Tripp Trapp chair you have. If you can’t find the release button, refer to the user manual or manufacturer’s website for specific instructions related to your chair model.

Now that you know where the release button is located, let’s move on to the next step: pressing the release button to remove the tray.

Press the Release Button

Once you have located the release button on the Stokke Tripp Trapp tray, it’s time to remove the tray. To do this, firmly press the release button using your fingers or thumb. Apply steady pressure to engage the mechanism and release the tray from its locked position.

As you press the release button, you may feel or hear a click, indicating that the tray has been successfully released. This click is a reassuring sign that you are on the right track. If you don’t hear a click, double-check that you are pressing the correct button and that you are pressing it firmly enough.

It’s worth noting that the release button is designed to be easy to operate, even with one hand. This allows you to remove the tray effortlessly while juggling other tasks, such as attending to your child or preparing a meal.

Remember to always exercise caution and be gentle when pressing the release button, as excessive force can potentially damage the tray or the chair. Additionally, if the tray doesn’t release after pressing the release button, it could indicate that it was not properly locked into place to begin with. In such cases, reposition the tray and try pressing the release button again.

Now that you have successfully pressed the release button, it’s time for the next step: lifting the tray off the Tripp Trapp chair.

Lift the Tray off the Tripp Trapp Chair

With the release button engaged, it’s time to lift the tray off the Stokke Tripp Trapp chair. This step requires a gentle yet firm grip to ensure a smooth and seamless removal.

Using both hands, place your fingers underneath the front edge of the tray, where it meets the chair. Gradually lift the tray upwards, applying even pressure on both sides to prevent any imbalance or tilting. As you lift, you may need to slightly tilt the tray towards you to help disengage it from the chair.

Depending on the age and usage of your Tripp Trapp chair, the tray may fit snugly and require a bit of maneuvering to remove. If you encounter any resistance, double-check that the release button is fully engaged and try gently rocking the tray from side to side as you lift.

Once the tray is lifted off the chair, set it aside in a safe place. You can clean the tray separately or make any necessary adjustments to the seat and footrest without the tray in the way.

It’s important to note that the tray is designed to be lightweight and easy to handle. However, be mindful of its size and shape, especially if you are removing it with one hand while carrying or tending to your child with the other hand.

Now that the tray has been successfully lifted off the Tripp Trapp chair, let’s move on to the next step: adjusting the position of the seat and footrest as needed.

Adjust the Position of the Seat and Footrest

After removing the tray from your Stokke Tripp Trapp chair, you have the freedom to adjust the position of the seat and footrest to accommodate your child’s needs. This customizable feature allows the chair to grow with your child and adapt to their changing size and comfort.

To adjust the seat height, locate the knobs or levers on the sides of the chair’s frame. These can usually be found near the bottom of the chair legs. Rotate or slide the knobs/levers to raise or lower the seat as desired. Ensure that the seat is securely locked into the desired position before proceeding.

Similarly, you can adjust the position of the footrest to provide optimal support for your child’s legs and feet. Look for the knobs or levers on the front side of the chair, near the bottom. Adjust the footrest up or down based on your child’s height and comfort. Again, make sure the footrest is properly locked into place after adjusting.

When adjusting the seat and footrest, take into consideration your child’s age, size, and sitting posture. The aim is to create an ergonomic and comfortable seating arrangement that promotes healthy spine alignment and posture development.

It’s worth noting that the Stokke Tripp Trapp chair is designed to be versatile and adaptable, ensuring optimal comfort and support for your child as they grow. These adjustable features make it a popular choice among parents who value ergonomic design and long-term usability.

Now that you have adjusted the position of the seat and footrest, the next step is to reattach the tray if needed. Let’s explore how to do that in the next section.

Reattach the Tray if Needed

Once you have made the necessary adjustments to the seat and footrest of your Stokke Tripp Trapp chair, you may choose to reattach the tray for added convenience and functionality. Reattaching the tray is a straightforward process that allows you to create a secure surface for your child to enjoy meals or engage in activities.

To reattach the tray, align it with the slots or grooves on the sides of the chair. The slots are usually located near the armrests or on the sides of the seat. Carefully slide the tray into the slots, ensuring that it sits securely and evenly on both sides.

Once the tray is in position, push it firmly towards the back of the chair until you hear or feel a click. This indicates that the tray is securely attached and locked into place. Gently shake the tray to confirm that it is stable and doesn’t wobble.

If the tray doesn’t slide into the slots easily, double-check that you have aligned it correctly. Sometimes, a slight adjustment or wiggle may be needed to get the tray to fit properly. Be patient, and avoid using excessive force to avoid any damage or misalignment.

It’s important to mention that not all Tripp Trapp chairs come with a tray option. Some models are designed to be used without a tray, allowing the chair to be pulled up to the dining table for family meals. If your chair doesn’t have a tray, simply skip this step and enjoy the versatility of the chair’s design.

With the tray reattached (if applicable), your Stokke Tripp Trapp chair is now ready to be used again. Ensure that the tray is clean and free from any debris or food particles before placing items on it.

Now that you have reattached the tray (if needed), you have successfully completed the process of removing and reattaching the tray on your Stokke Tripp Trapp chair. Enjoy the convenience and functionality that this versatile chair provides for you and your child.