Materials Needed
Before you begin reinforcing a picture frame, it’s important to gather all the necessary materials. Having these items on hand will ensure a smooth and successful reinforcement process. Here are the materials you’ll need:
- Picture frame in need of reinforcement
- Corner brackets (metal or plastic)
- Epoxy resin or wood glue
- Metal reinforcements (such as metal L-brackets or steel mending plates)
- Plywood (if opting for the plywood reinforcement method)
- Screws and screwdriver
- Sandpaper or sanding block
- Paint or stain (optional, for finishing touches)
- Paintbrush or sponge for paint/stain application (if desired)
- Protective gloves
- Eye protection
Having these materials readily available will save you time and allow you to tackle the task at hand without interruptions. Make sure to have a safe and well-ventilated environment to work in, as some materials may emit strong odors or fumes.
Once you have gathered all the necessary materials, you’re ready to move on to the next step: assessing the frame and determining the most suitable reinforcement method.
Step 1: Assess the Frame
Before diving into the process of reinforcing a picture frame, it’s important to assess the frame to determine the extent of the damage and the areas that require reinforcement. This step will help you understand the underlying issues and choose the appropriate method for reinforcement.
Start by examining the corners of the frame, as they are usually the weakest points. Look for any signs of separation or gaps between the joints. Additionally, check the stability of the frame by gently rocking it back and forth. If you notice any wobbling or shifting, it’s a sign that the frame needs reinforcement.
Inspect the condition of the frame material as well. Wooden frames may have splintering or cracks, while metal frames could have bent or weakened sections. Make a note of these areas as they will need special attention during the reinforcement process.
Consider the weight and size of the picture or artwork that the frame will hold. Frames supporting heavier pieces will require stronger reinforcements compared to those used for lightweight art. Keep in mind that large frames might also require additional supports to prevent warping or bowing over time.
During the assessment, take note of the type of frame you have. Different frames may require specific reinforcement methods. For example, a wooden frame might benefit from epoxy resin or wood glue, while a metal frame might be better reinforced with corner brackets or metal reinforcements.
By thoroughly assessing the frame, you’ll have a clear understanding of its condition and the necessary reinforcements needed. This will help you choose the most suitable method for strengthening the frame and ensure a long-lasting solution.
Step 2: Determine the Reinforcement Method
Once you have assessed the frame and identified the areas that require reinforcement, the next step is to determine the most suitable method for strengthening the frame. There are several options available, depending on the type of frame and the extent of the damage.
Here are some common methods of reinforcing a picture frame:
Method 1: Adding Corner Brackets
If the corners of the frame are weak or separated, adding corner brackets can provide additional support. These brackets, available in metal or plastic, are designed to connect the corners of the frame, enhancing its structural integrity. Secure the corner brackets with screws to reinforce the joints and prevent further separation.
Method 2: Using Epoxy Resin or Wood Glue
If the frame is made of wood and has loose or cracked joints, using epoxy resin or wood glue can help strengthen the connections. Apply the adhesive to the joints, ensuring a thorough and even application. Clamp the frame together and allow the adhesive to dry according to the manufacturer’s instructions. This will create a strong bond and restore stability to the frame.
Method 3: Installing Metal Reinforcements
For frames made of metal or frames with significant damage, installing metal reinforcements can provide the necessary reinforcement. Metal L-brackets or steel mending plates can be attached to the weakened areas using screws. These reinforcements will add strength and structural stability to the frame, preventing further damage.
Method 4: Strengthening with Plywood
In cases where the frame requires extensive reinforcement due to its size or weight, strengthening with plywood can be a viable option. Cut a piece of plywood to fit the back of the frame and attach it using screws. This will distribute the weight evenly and provide extra support, minimizing the risk of warping or bowing.
Choose the method that best suits your specific frame and the issues you have identified during the assessment. Consider factors such as the frame material, the extent of damage, and the weight of the artwork. By choosing the appropriate reinforcement method, you can effectively restore the frame’s stability and durability.
Method 1: Adding Corner Brackets
If the corners of your picture frame are weak or separating, adding corner brackets can provide the necessary reinforcement. Corner brackets are available in both metal and plastic options and are designed to connect and strengthen the corners of the frame.
Here’s a step-by-step guide on how to add corner brackets to reinforce your picture frame:
Step 1: Assess the Corners
Examine the corners of your picture frame carefully. Look for any signs of weakness, separation, or gaps between the joints. Identifying the areas that need reinforcement will help you determine where to install the corner brackets.
Step 2: Choose the Proper Brackets
Select the appropriate corner brackets for your frame. Consider the material and weight of your frame, as well as your desired aesthetic. Both metal and plastic brackets can effectively reinforce the corners, but metal brackets may provide a sturdier option for heavier frames.
Step 3: Position the Brackets
Place the corner brackets on the corners of the frame where reinforcement is needed. Ensure that the brackets align properly with the frame corners and are evenly placed. The brackets should be flush against the frame and provide a secure attachment point.
Step 4: Secure the Brackets
Using screws appropriate for your frame material, attach the corner brackets to the frame. Make sure to drive the screws through the holes in the brackets and into the frame securely. Ensure that the brackets are tightly fastened, but be cautious not to overtighten and damage the frame.
Step 5: Test the Stability
After installing the corner brackets, test the stability of the frame by gently rocking it back and forth. The addition of the corner brackets should help eliminate any wobbling or shifting. If the frame still feels unstable, consider adding additional brackets or exploring alternative reinforcement methods.
Adding corner brackets is an effective way to reinforce the corners of a picture frame and prevent further damage or separation. By following these steps, you can restore stability and prolong the lifespan of your frame, ensuring that it can securely hold your cherished artwork.
Method 2: Using Epoxy Resin or Wood Glue
If your picture frame has loose or cracked joints and is made of wood, using epoxy resin or wood glue can effectively reinforce the connections. This method creates a strong bond that restores stability to the frame.
Follow these step-by-step instructions to reinforce your picture frame using epoxy resin or wood glue:
Step 1: Prep the Joints
Start by cleaning and sanding the joints of the picture frame. Remove any dirt, dust, or old adhesive using a clean cloth or sandpaper. This will ensure better adhesion and a strong bond between the joints.
Step 2: Apply the Adhesive
Apply the epoxy resin or wood glue to the joints of the picture frame using a small brush or applicator. Ensure that each joint is evenly coated with the adhesive. Be careful not to apply too much, as excess glue may squeeze out when the joints are clamped together.
Step 3: Secure the Joints
Press the joints of the picture frame together firmly. Use clamps or apply pressure to hold the joints in place while the adhesive sets. Follow the instructions provided by the manufacturer to determine the recommended drying or curing time for the adhesive.
Step 4: Remove Excess Adhesive
Wipe away any excess adhesive that may have squeezed out of the joints using a clean cloth or a damp sponge. This will give your picture frame a clean and polished appearance once the adhesive has fully dried.
Step 5: Let the Adhesive Cure
Allow the adhesive to cure for the recommended amount of time specified by the manufacturer. This will ensure that the joints are fully bonded and solidified, providing maximum reinforcement to the frame.
Using epoxy resin or wood glue can effectively strengthen the joints of your picture frame and prevent further loosening or cracking. By following these steps, you can restore the stability and durability of your frame, ensuring that it can securely hold your cherished artwork for years to come.
Method 3: Installing Metal Reinforcements
If you have a picture frame that is made of metal or has significant damage, installing metal reinforcements can provide the necessary support and strengthen the frame. Metal reinforcements such as metal L-brackets or steel mending plates can be easily installed to reinforce weakened areas and prevent further damage.
Follow these steps to install metal reinforcements in your picture frame:
Step 1: Assess the Weak Areas
Examine your picture frame to identify the weak or damaged areas that require reinforcement. Look for any bends, cracks, or signs of instability. These are the areas where the metal reinforcements will be most effective.
Step 2: Choose the Proper Reinforcements
Select the appropriate metal reinforcements for your frame. Metal L-brackets or steel mending plates are commonly used for this purpose. Consider the size, material, and strength of the reinforcements based on the specific needs of your frame.
Step 3: Position the Reinforcements
Place the metal reinforcements on the weakened areas of the frame. Ensure that they align properly and cover the vulnerable spots. If necessary, mark the position of the reinforcements lightly with a pencil to guide you during the installation process.
Step 4: Secure the Reinforcements
Using screws or fasteners appropriate for your frame and the chosen reinforcements, attach the metal reinforcements to the frame. Make sure to drive the screws through the holes in the reinforcements and into the frame securely. Tighten the screws without overtightening, ensuring that the reinforcements are firmly and evenly attached.
Step 5: Test the Sturdiness
After installing the metal reinforcements, test the stability and sturdiness of the frame. Gently shake the frame or apply light pressure to ensure that the reinforcements have provided the desired reinforcement. The frame should feel stronger and more solid than before.
Installing metal reinforcements in your picture frame can significantly strengthen its structure and prevent further damage. By following these steps, you can ensure that your frame is well-supported and capable of securely holding your artwork or photographs.
Method 4: Strengthening with Plywood
If you have a picture frame that requires extensive reinforcement, especially due to its size or weight, strengthening it with plywood can be an effective method. Plywood provides additional support and stability to the frame, minimizing the risk of warping or bowing over time.
Follow these steps to strengthen your picture frame with plywood:
Step 1: Assess the Frame
Examine your picture frame and identify the areas that require reinforcement. Pay attention to any signs of bowing or instability in the frame. These weaker areas will benefit from the added support of plywood.
Step 2: Choose the Right Plywood
Select a piece of plywood that is appropriate for your frame. Consider the thickness and type of plywood based on the size and weight of your frame. Opt for high-quality plywood to ensure strength and durability.
Step 3: Measure and Cut the Plywood
Measure the dimensions needed for the plywood reinforcement. Use a tape measure to determine the precise size required to cover the back of the frame. Using a saw or appropriate cutting tool, carefully cut the plywood to match the measured dimensions.
Step 4: Attach the Plywood to the Frame
Position the cut plywood onto the back of the frame, aligning it properly. Secure the plywood to the frame using screws. Be mindful of the size and number of screws you use, ensuring they are evenly distributed to provide uniform reinforcement.
Step 5: Trim and Finish (if desired)
Trim any excess plywood that extends beyond the edges of the frame using a saw or a cutting tool. Sand the edges to smooth them down if necessary. If desired, you can apply paint or stain to the plywood to match the frame’s aesthetic and give it a finished look.
Step 6: Test the Stability
Once the plywood reinforcement is securely attached, test the stability of the frame. Gently shake the frame or apply light pressure to ensure that it feels solid and resistant to bending or warping. The added plywood should provide the necessary strength and support to the frame.
Strengthening your picture frame with plywood is an effective technique for providing extra stability and durability. By following these steps, you can ensure that your frame is resistant to bending and twisting, allowing it to securely display your artwork or photographs for years to come.
Step 3: Prepare the Frame for Reinforcement
Before proceeding with the actual reinforcement process, it is crucial to properly prepare the frame to ensure optimal results. This step involves taking necessary precautions and making necessary adjustments to ensure a smooth and successful reinforcement process.
Here are the essential steps to prepare the frame for reinforcement:
Step 1: Clean the Frame
Begin by cleaning the frame thoroughly. Remove any dust, dirt, or debris that may have accumulated on the surface. Use a soft cloth or a brush to gently clean the frame, paying attention to corners and crevices.
Step 2: Remove the Artwork
If your frame contains artwork or a photograph, carefully remove it. This will allow you to work on the frame freely without the risk of damaging the artwork. Set the artwork aside in a safe place to prevent any potential damage.
Step 3: Disassemble the Frame (if necessary)
If the frame is in a condition that requires disassembly, carefully remove any backing, glass, or other components. Take note of the disassembled pieces and keep them organized to facilitate the reassembly process later on.
Step 4: Inspect and Repair
Thoroughly inspect the frame for any damage, loose joints, or weakened areas. Address any issues found by repairing or reinforcing them before proceeding with the main reinforcement process.
Step 5: Sand Rough Surfaces (if necessary)
If the frame has rough or uneven surfaces, lightly sand them to create a smooth and even surface. This will help with the bonding process when applying adhesives or attaching reinforcements.
Step 6: Paint or Stain (optional)
If desired, you can consider painting or staining the frame at this stage. This can be done to refresh the look of the frame or to match it with your preferred aesthetic. Ensure that the paint or stain is completely dry before proceeding with the reinforcement process.
By following these steps to prepare the frame, you can ensure that it is in optimal condition for reinforcement. Proper preparation will not only enhance the results of the reinforcement process but also contribute to the longevity and durability of the frame.
Step 4: Reinforce the Corners
With the frame adequately prepared, it’s time to focus on reinforcing the corners. The corners are often the weakest points of a picture frame, and reinforcing them will significantly enhance the frame’s stability and longevity. Follow these steps to reinforce the corners:
Step 1: Align the Corners
Gently align the corners of the frame to ensure they are properly aligned and in the correct position. Make sure the corners are flush and even, as this will facilitate a secure and seamless reinforcement process.
Step 2: Apply Adhesive
Depending on the chosen reinforcement method, apply the appropriate adhesive to the corners. This could be wood glue, epoxy resin, or any other adhesive suitable for your frame material and reinforcement method. Apply the adhesive according to the manufacturer’s instructions, ensuring sufficient coverage on the joint surfaces.
Step 3: Secure the Corners
Once the adhesive is applied, tightly press the corners together. Apply firm and even pressure to create a strong bond between the joint surfaces. Hold the corners in place for the specified drying or curing time recommended by the adhesive manufacturer.
Step 4: Use Clamps (if needed)
In some cases, using clamps can provide additional support while the adhesive sets. If required, gently clamp the corners and tighten the clamps just enough to maintain a secure hold on the corners. Be cautious not to overtighten and cause damage to the frame or adhesive joint.
Step 5: Allow for Proper Drying or Curing Time
After securing the corners, allow the adhesive to dry or cure completely. This will typically take several hours or even overnight, depending on the adhesive used. Be patient and follow the manufacturer’s instructions to ensure a strong and reliable bond.
Step 6: Clean Excess Adhesive (if necessary)
If any adhesive oozes out from the corners during the reinforcement process, carefully clean it immediately using a damp cloth or sponge. This will help maintain a neat and professional finish to your reinforced corners.
Reinforcing the corners of your picture frame is a key step in increasing its stability and durability. By following these steps, you can ensure that the corners are securely bonded, adding strength and longevity to your frame.
Step 5: Apply Epoxy Resin or Wood Glue (if applicable)
If you have chosen to reinforce your picture frame using epoxy resin or wood glue, this step will guide you through the process of applying the adhesive. Epoxy resin or wood glue can effectively strengthen joints and provide a long-lasting bond.
Step 1: Prepare the Adhesive
Follow the manufacturer’s instructions to prepare the epoxy resin or wood glue. This may involve mixing specific ratios of resin and hardener or simply opening the bottle or tube of wood glue.
Step 2: Apply the Adhesive
Using a small brush or applicator, carefully apply the epoxy resin or wood glue to the joints that need reinforcement. Ensure that the adhesive is evenly distributed and covers the entire joint surface. Pay extra attention to any cracks or gaps that need to be filled.
Step 3: Clamp (if necessary)
If the joints require added pressure during the bonding process, use clamps to secure the parts. Place the clamps strategically to apply gentle pressure and ensure a tight fit. Be cautious not to overtighten, as this may damage the frame or distort the joint alignment.
Step 4: Follow Drying/Curing Instructions
Allow the epoxy resin or wood glue to dry or cure according to the manufacturer’s instructions. This will typically take several hours or longer, depending on the product and ambient conditions. Make sure to provide ample time for the adhesive to fully set before moving on to the next steps.
Step 5: Clean Up Excess Adhesive
If any adhesive has squeezed out from the joints during the application process, use a damp cloth or sponge to clean it up. This will ensure a neat and professional appearance to your reinforced joints.
Applying epoxy resin or wood glue is an effective way to reinforce joints and enhance the strength of your picture frame. By following these steps, you can achieve a solid and durable bond that will help maintain the structural integrity of your frame for years to come.
Step 6: Install Metal Reinforcements (if applicable)
If you have chosen to reinforce your picture frame with metal reinforcements, this step will guide you through the process of installing them. Metal reinforcements such as metal L-brackets or steel mending plates can add strength and stability to your frame.
Step 1: Select the Proper Metal Reinforcements
Based on your frame’s specific needs and the areas requiring reinforcement, choose the appropriate metal reinforcements. Metal L-brackets and steel mending plates are commonly used for this purpose. Consider the size, material, and strength of the reinforcements according to your frame’s requirements.
Step 2: Position the Reinforcements
Identify the areas on the frame where the metal reinforcements will be installed. Properly align the reinforcements with the weakened or damaged areas. Ensure that they are flush against the frame and positioned in a way that reinforces the vulnerable spots.
Step 3: Mark and Pre-drill Holes
Using a pencil or a marker, mark the locations where holes will be drilled for the screws or fasteners. Take care to align the holes properly with the holes in the reinforcements. Pre-drill the marked holes to make it easier to attach the reinforcements to the frame.
Step 4: Attach the Reinforcements
Securely attach the metal reinforcements to the frame using screws or fasteners appropriate for your frame material and the chosen reinforcements. Drive the screws through the pre-drilled holes in the reinforcements and into the frame, ensuring a tight fit without overtightening.
Step 5: Test the Stability
After installing the metal reinforcements, test the stability of the frame by gently shaking it or applying light pressure. The reinforcements should add strength and rigidity to the frame, reducing any wobbling or shifting. If needed, consider adding additional reinforcements to ensure optimum stability.
Step 6: Clean Up
Clean any excess debris or metal shavings that may have been left behind during the installation process. Use a cloth or a brush to ensure that the frame is clean and free from any sharp or rough particles.
By following these steps, you can effectively install metal reinforcements to enhance the stability and durability of your picture frame. Metal reinforcements provide added strength to vulnerable areas, ensuring that your frame remains intact and securely holds your artwork or photographs over time.
Step 7: Strengthen with Plywood (if applicable)
If you have opted to strengthen your picture frame with plywood, this step will guide you through the process of reinforcing the frame using this material. Strengthening with plywood provides additional support, particularly for larger or heavier frames.
Step 1: Assess the Frame’s Needs
Consider the size, weight, and overall condition of your frame to determine if reinforcing with plywood is necessary. Frames that exhibit signs of weakness, warping, or bowing may benefit from the added stability provided by plywood.
Step 2: Select the Right Plywood
Choose a suitable plywood sheet for your frame, considering factors such as thickness, material, and finish. Opt for a high-quality plywood that is sturdy and compatible with the size and weight of your frame.
Step 3: Measure and Cut the Plywood
Measure the dimensions of your frame’s back and mark them on the plywood sheet. Use a saw or a cutting tool to carefully cut the plywood according to the measured dimensions. Ensure that the cut plywood fits precisely against the back of the frame.
Step 4: Position and Align the Plywood
Place the cut plywood sheet over the back of the frame, aligning it properly. Ensure that the plywood covers the weak or damaged areas that require reinforcement. Make sure the plywood is centered and evenly positioned on the frame.
Step 5: Secure the Plywood
Using screws appropriate for your frame material, attach the plywood to the back of the frame. Space the screws evenly, ensuring that they provide a secure hold without compromising the frame’s integrity. Drive the screws through the plywood and into the frame, taking care not to overtighten.
Step 6: Trim and Finish (if desired)
If the plywood extends beyond the edges of the frame, use a saw or a cutting tool to trim any excess. Sand the edges of the plywood to create a smooth finish. You can also choose to paint or stain the plywood to match the frame’s aesthetic, keeping in mind any finish preferences or artwork requirements.
By following these steps, you can effectively strengthen your picture frame using plywood. This method provides added stability and support, ensuring that your frame remains structurally sound and capable of securely displaying your artwork or photographs for years to come.
Step 8: Allow the Reinforcements to Settle
After reinforcing your picture frame, it is crucial to allow the reinforcements to settle and bond properly before proceeding with reassembly or further handling. This step ensures that the frame becomes stable, strong, and ready for use.
Step 1: Follow the Recommended Time
Consult the instructions provided by the adhesive or reinforcement material manufacturer. These instructions should specify the recommended drying, curing, or settling time needed for the reinforcements to fully bond and achieve their maximum strength.
Step 2: Provide Adequate Time for Settling
Be patient and allow ample time for the reinforcements to settle. This will typically range from a few hours to several days, depending on the chosen reinforcement method and materials used. It is essential to give the frame sufficient time to ensure optimal bonding and stability.
Step 3: Maintain Ideal Conditions
During the settling period, ensure that the frame is placed in a stable environment. Avoid exposing it to excessive heat, cold, humidity, or direct sunlight, as these factors could compromise the bonding process. Maintain a moderate temperature and humidity level for the best results.
Step 4: Avoid Disturbing the Frame
Refrain from moving, handling, or applying any pressure to the reinforced areas during the settling period. This will help prevent any potential damage or disruption to the bond, ensuring the reinforcements solidify properly and securely.
Step 5: Regularly Inspect and Monitor
Regularly check the frame during the settling period to ensure that everything remains intact and in place. Look for any signs of shifting, loosening, or other issues that may require additional attention. Address any concerns promptly to maintain the stability and durability of the frame.
By allowing the reinforcements to settle properly, you ensure that your picture frame becomes strong and structurally sound. Following the recommended settling time and taking care to create an ideal environment will result in a frame that can securely hold your artwork or photographs for a long time.
Step 9: Reassemble the Frame
After the reinforcement process and allowing sufficient settling time, it’s time to reassemble your picture frame. This step involves putting all the components back together to restore the frame to its original form.
Step 1: Gather the Components
Collect all the components that were disassembled during the preparation stage. This typically includes the frame pieces, backing board, glass or acrylic panel, and any additional hardware or accessories.
Step 2: Clean the Components
Before reassembling, make sure to clean any parts that may have accumulated dust or debris while they were separated. Wipe the surfaces with a clean, soft cloth or use a suitable cleaning solution if necessary to ensure a pristine finish.
Step 3: Align the Components
Start by aligning the frame pieces and matching the corners. Ensure that they fit together snugly and are properly aligned. Take your time to adjust and position the pieces to align perfectly.
Step 4: Secure the Frame
Using the appropriate hardware, such as screws or clips, secure the frame pieces together. Apply gentle pressure to ensure a tight fit without damaging the frame or its reinforcements. Follow the manufacturer’s instructions or any specific guidelines for your frame’s hardware.
Step 5: Insert the Backing and Artwork
Place the backing board into the frame to secure the contents. If your frame has a glass or acrylic panel, carefully insert it into its designated space. Finally, gently insert your artwork or photograph between the backing and the glass, ensuring it is centered and properly positioned.
Step 6: Secure the Backing
Using the appropriate hardware or fasteners, secure the backing board in place. This may involve inserting small pins, nails, or screws to ensure that the backing remains tightly secured within the frame.
Step 7: Perform Final Check
Carefully inspect the reassembled frame to ensure that everything is securely in place and aligned correctly. Check for any loose components, gaps, or other issues that may need attention. Make any necessary adjustments or fixes at this stage.
By following these steps, you can successfully reassemble your picture frame, ensuring that all the components are properly secured and aligned. Take your time during this process to achieve a finished frame that is structurally sound and ready to showcase your cherished artwork or photographs.
Additional Tips and Considerations
When reinforcing a picture frame, there are some additional tips and considerations that can help ensure a successful outcome. Take note of the following suggestions to further enhance the reinforcement process:
1. Safety First
Wear protective gloves and eye protection when working with adhesives, screws, or other materials. Take precautions to prevent any injuries during the reinforcement process.
2. Choose the Right Materials
Select high-quality materials that are suitable for your frame and the specific reinforcement method chosen. Using the appropriate materials will contribute to the longevity and durability of the frame.
3. Follow Manufacturer’s Instructions
Adhere to the instructions provided by the manufacturers of adhesives, reinforcements, or any other materials used in the process. These guidelines ensure that you achieve the best possible results and maintain the integrity of the materials.
4. Consider Professional Assistance
If you are uncertain about the reinforcement process or if your frame requires complex repairs, it may be best to seek professional assistance. A professional framer or restoration specialist can offer expertise and ensure the frame is properly reinforced.
5. Regularly Inspect and Maintain
After reinforcing the frame, periodically inspect it for any signs of damage or weakness. If you notice any issues, address them promptly to prevent further damage. Regular maintenance helps prolong the lifespan of the frame.
6. Avoid Excessive Weight or Stress
Be mindful of the weight or stress placed on the frame after reinforcement. Avoid hanging excessively heavy artwork or repeatedly moving the frame in a manner that puts strain on the joints or reinforcements. This helps maintain the frame’s stability and integrity.
7. Store and Handle with Care
When not in use, store the frame in a protective cover or box to prevent any accidental damage. When handling the frame, use caution to avoid any bumps, dents, or scratches that could compromise the reinforced areas.
By following these additional tips and considerations, you can ensure a successful reinforcement process and prolong the life of your picture frame. Taking care of your frame and maintaining its structural integrity will allow you to enjoy your artwork or photographs for years to come.
