Preparing Your Device for Rooting
Before diving into the rooting process for your Xiaomi Mi Note Pro, it's crucial to ensure that your device is adequately prepared. This preparation involves several essential steps to safeguard your data and facilitate a smooth rooting experience.
Backing Up Your Data
The first and most critical step in preparing your device for rooting is to back up all your important data. Rooting your device involves making significant changes to its operating system, which can potentially lead to data loss. By creating a comprehensive backup of your photos, videos, contacts, messages, and any other essential files, you can safeguard your information and restore it if necessary.
Enabling Developer Options
To proceed with the rooting process, you need to enable the Developer Options on your Xiaomi Mi Note Pro. This can be done by navigating to the "Settings" menu, tapping on "About Phone," and then tapping on the "Build Number" multiple times until you see a message confirming that Developer Options have been enabled.
Enabling USB Debugging
Once Developer Options are enabled, you should access the Developer Options menu within the Settings and enable USB Debugging. This feature allows your computer to communicate with your Xiaomi Mi Note Pro during the rooting process and is crucial for establishing a successful connection.
Checking Battery Level
It's important to ensure that your device has an adequate battery level before initiating the rooting process. A minimum of 50% battery charge is recommended to prevent any interruptions during the procedure.
Installing Necessary Drivers
To ensure seamless communication between your Xiaomi Mi Note Pro and your computer, it's advisable to install the required USB drivers. These drivers enable your computer to recognize and interact with your device effectively, facilitating a smooth rooting process.
By meticulously following these preparatory steps, you can set the stage for a successful and hassle-free rooting experience for your Xiaomi Mi Note Pro. Taking the time to back up your data, enable Developer Options, USB debugging, and check your battery level, as well as installing the necessary drivers, will help mitigate potential risks and ensure that your device is ready for the subsequent stages of the rooting process.
Unlocking the Bootloader
Unlocking the bootloader is a crucial initial step in the process of rooting your Xiaomi Mi Note Pro. The bootloader, which is a program that initializes the operating system when the device is powered on, typically restricts the user from making significant modifications to the system. By unlocking the bootloader, you gain the ability to install custom recovery and root your device, thereby opening up a world of customization and optimization possibilities.
To initiate the bootloader unlocking process, you will first need to visit the official Xiaomi website or the MIUI Community and apply for permission to unlock the bootloader of your Mi Note Pro. This step is essential as it ensures that you have the necessary authorization from Xiaomi to proceed with unlocking the bootloader. Upon receiving the permission, you can then proceed with the following steps:
-
Enable OEM Unlocking: Before commencing the bootloader unlocking process, it is crucial to enable the OEM unlocking option in the Developer Options menu on your Mi Note Pro. This can be done by navigating to Settings > Additional Settings > Developer Options, and then toggling the OEM unlocking option.
-
Power Off the Device: Once the OEM unlocking option is enabled, power off your Mi Note Pro to prepare for the next steps in the bootloader unlocking process.
-
Access Fastboot Mode: After powering off the device, press and hold the Power button and the Volume Down button simultaneously to enter Fastboot mode. In this mode, you will see the Mi Bunny logo displayed on the screen, indicating that the device is in Fastboot mode and ready for further instructions.
-
Connect to Computer: Using a USB cable, connect your Mi Note Pro to your computer while it is in Fastboot mode. This connection is essential for executing the subsequent commands to unlock the bootloader.
-
Execute Unlock Command: On your computer, open a command prompt or terminal window and navigate to the directory where the ADB and Fastboot tools are installed. Once in the appropriate directory, enter the command to unlock the bootloader, which typically involves using the fastboot oem unlock command.
-
Follow On-Screen Instructions: After entering the unlock command, your Mi Note Pro will display a prompt seeking confirmation to unlock the bootloader. Use the volume buttons to navigate and the power button to confirm the action. Once confirmed, the bootloader unlocking process will commence, and your device will be reset to factory settings.
By successfully unlocking the bootloader of your Xiaomi Mi Note Pro, you have laid the groundwork for the subsequent stages of the rooting process, including the installation of custom recovery and the actual rooting of the device. This pivotal step unlocks the full potential of your device, empowering you to customize and optimize its performance according to your preferences and requirements.
Installing TWRP Recovery
Installing the TWRP (Team Win Recovery Project) custom recovery on your Xiaomi Mi Note Pro is a fundamental step in the process of rooting and customizing your device. TWRP provides a versatile and user-friendly interface that allows you to perform various advanced operations such as flashing custom ROMs, creating and restoring backups, and installing system modifications. Here's a detailed guide on how to install TWRP recovery on your Xiaomi Mi Note Pro:
Pre-Requisites
Before proceeding with the installation of TWRP recovery, it's essential to ensure that you have unlocked the bootloader of your Mi Note Pro, as this is a prerequisite for installing custom recovery. Additionally, make sure that you have the necessary USB drivers installed on your computer to establish a stable connection with your device during the installation process.
Downloading TWRP Image
Begin by downloading the TWRP recovery image file specifically designed for the Xiaomi Mi Note Pro from the official TWRP website or trusted third-party sources. It's crucial to verify the compatibility and authenticity of the TWRP image to ensure a smooth and secure installation process.
Booting into Fastboot Mode
Power off your Mi Note Pro and then boot it into Fastboot mode by pressing and holding the Power button and Volume Down button simultaneously. In Fastboot mode, the Mi Bunny logo will appear on the screen, indicating that the device is ready for further commands.
Connecting to Computer
Using a USB cable, establish a connection between your Mi Note Pro in Fastboot mode and your computer. This connection is essential for transferring the TWRP recovery image to your device and executing the installation commands.
Flashing TWRP Recovery
On your computer, navigate to the directory where the ADB and Fastboot tools are installed. Locate the TWRP recovery image file that you downloaded earlier and place it in the same directory as the ADB and Fastboot tools for convenience. Open a command prompt or terminal window in this directory.
Execute the command to flash the TWRP recovery image to your Mi Note Pro using the following syntax:
bash
fastboot flash recovery <twrp_filename.img>
Replace <twrp_filename.img> with the actual filename of the TWRP recovery image file.
Booting into TWRP Recovery
Once the TWRP recovery image is successfully flashed to your device, reboot into recovery mode by using the following command:
bash
fastboot boot <twrp_filename.img>
Replace <twrp_filename.img> with the actual filename of the TWRP recovery image file.
Verifying TWRP Installation
Your Mi Note Pro will now boot into TWRP recovery mode, allowing you to perform various advanced operations. It's essential to verify that TWRP recovery has been successfully installed by navigating through the TWRP interface and ensuring that it functions as intended.
By following these detailed steps, you can successfully install the TWRP custom recovery on your Xiaomi Mi Note Pro, paving the way for further customization and optimization of your device through the rooting process and the installation of custom ROMs and system modifications. TWRP recovery empowers you to explore the full potential of your device and tailor its functionality to suit your preferences and requirements.
Rooting Your Xiaomi Mi Note Pro
Rooting your Xiaomi Mi Note Pro is the final and pivotal step in unlocking the full potential of your device, enabling you to customize and optimize its performance according to your preferences and requirements. By gaining root access, you attain elevated privileges that allow you to modify the system settings, remove bloatware, and install powerful applications that harness the true capabilities of your device. Here's a comprehensive guide on how to root your Xiaomi Mi Note Pro:
Pre-Requisites
Before initiating the rooting process, ensure that you have unlocked the bootloader of your Mi Note Pro and installed TWRP custom recovery, as these are essential prerequisites for rooting and customizing your device. Additionally, make sure that your device has an adequate battery level and that you have backed up all essential data to prevent any potential data loss during the rooting process.
Downloading Root Package
Begin by downloading the appropriate root package for your Xiaomi Mi Note Pro from a trusted source. It's crucial to verify the compatibility and authenticity of the root package to ensure a secure and successful rooting process.
Booting into TWRP Recovery
Power off your Mi Note Pro and then boot it into TWRP recovery mode by pressing and holding the Power button and Volume Up button simultaneously. In TWRP recovery mode, you will gain access to advanced options for installing the root package and initiating the rooting process.
Flashing Root Package
Using the TWRP interface, navigate to the location where the root package is stored and select the package for installation. Swipe to confirm the flash, and the root package will be installed on your Mi Note Pro.
Initiating Rooting Process
After the root package is successfully installed, navigate back to the TWRP main menu and select the "Reboot" option. Choose to reboot your device into the system. Upon rebooting, your Xiaomi Mi Note Pro will have gained root access, granting you elevated privileges to customize and optimize its functionality.
By following these detailed steps, you can successfully root your Xiaomi Mi Note Pro, unlocking a world of possibilities for customizing and enhancing the performance of your device. Root access empowers you to delve into advanced system modifications and optimizations, providing you with the flexibility to tailor your device according to your unique preferences and requirements.
