How to Remove An Acer Monitor Stand

Tools you will need

In order to remove the stand from your Acer monitor, you will need a few tools to assist you in the process. These tools will help ensure a smooth and hassle-free removal, allowing you to either mount the monitor on a wall or replace the stand with a different one of your choosing. Here are the essential tools you will need:

Flathead screwdriver: This tool will be useful for removing any screws or fasteners securing the stand to the monitor.
Phillips screwdriver: Some Acer monitors may require a Phillips screwdriver instead of a flathead screwdriver. It’s always a good idea to have both types on hand, just in case.
Soft cloth or microfiber cloth: Using a soft cloth or microfiber cloth will help protect the monitor screen from scratches or smudges during the removal process.
Work area: Find a clean and spacious work area where you can comfortably lay down the monitor and have easy access to all sides.
Additional tools (if necessary): Depending on the specific model of your Acer monitor, you may require additional tools such as pliers, a hex key, or a socket wrench. Check the user manual or manufacturer’s website for any specific tool recommendations.

Having these tools ready before you begin will ensure that you have everything you need to successfully remove the stand from your Acer monitor. It’s always better to be prepared and have the right tools on hand, rather than having to stop in the middle of the process to search for missing tools.

Disconnecting the monitor

Before you can remove the stand from your Acer monitor, the first step is to disconnect the monitor from any power source or cables that are connected to it. This ensures your safety and prevents any potential damage to the monitor during the removal process. Here’s how you can disconnect the monitor:

Turn off the monitor: Press the power button on the monitor to turn it off. Wait for the screen to go black and any indicator lights to turn off.
Unplug the power cord: Locate the power cord connected to the monitor and unplug it from the power outlet.
Remove any other cables: If there are any cables connected to the monitor, such as HDMI, DisplayPort, or VGA cables, gently unplug them from the appropriate ports on the back of the monitor.

Make sure to handle the cables with care and avoid pulling or yanking on them forcefully, as this can cause damage to the cables or the ports on the monitor. If you find it difficult to remove the cables, try gently wiggling them back and forth while pulling them out.

Once you have disconnected the monitor from all power sources and cables, you are ready to proceed with the next steps of removing the stand. Ensure that the monitor is placed on a stable surface and take caution to avoid any accidental falls or damage.

Removing the base

After disconnecting the monitor from all power sources and cables, the next step is to remove the base from your Acer monitor. The base is what holds the monitor upright and allows for adjustments in tilt and height. Follow these steps to remove the base:

Flip the monitor over: Lay the monitor on a soft cloth or a flat surface, with the screen facing down. This will protect the screen from scratching or damage during the removal process.
Locate the release button or mechanism: Depending on the model of your Acer monitor, there may be a release button or lever on the back of the base. Look for any markings or indicators that point to the location of the release button.
Press or activate the release button: Once you have located the release button or mechanism, press it or activate it to unlock the base from the monitor. You may need to apply some pressure or hold the button down while removing the base.
Slide or lift the base off: With the release button activated, slide the base away from the monitor or lift it upwards, depending on the design. The base should detach easily from the monitor once it is unlocked.

Ensure that you handle the base with care while removing it. Some bases may be heavy or bulky, so it’s important to maintain a firm grip and avoid dropping it or causing any damage.

Now that the base has been successfully removed, you can proceed to the next step of detaching the stand arm from the monitor. Keep the base in a safe place in case you decide to reattach it in the future.

Detaching the stand arm from the monitor

With the base of your Acer monitor removed, the next step is to detach the stand arm from the monitor itself. The stand arm is the vertical component that connects the base to the back of the monitor. Follow these steps to detach the stand arm:

Inspect the stand arm: Take a close look at the stand arm to identify any screws, fasteners, or locking mechanisms that are holding it in place. These may vary depending on the model of your Acer monitor.
Use the appropriate tool: Based on your observations, choose the appropriate tool such as a screwdriver or Allen wrench to remove the screws or fasteners. Ensure that the tool fits securely to prevent any damage to the screws or the stand arm.
Loosen and remove the screws or fasteners: Apply gentle but consistent pressure on the screws or fasteners to loosen them. Once they are loosened, carefully remove them from the stand arm.
Separate the stand arm from the monitor: After removing the screws or fasteners, you should be able to detach the stand arm from the back of the monitor. Hold the stand arm securely while doing this to avoid any accidental drops or damage to the monitor.

Once the stand arm is detached, set it aside in a safe place. It is recommended to keep the screws or fasteners in a labeled container to prevent them from getting misplaced. You can also choose to reattach the stand arm in the future if needed.

Congratulations! You have successfully removed the stand arm from your Acer monitor. The next step involves removing the VESA mount adapter, which is optional but may be applicable to some monitor models. Continue reading to learn more.

Removing the VESA mount adapter

If your Acer monitor is equipped with a VESA mount adapter, you may need to remove it to fully detach the stand. The VESA mount adapter allows you to mount the monitor on a different stand or wall mount. Follow these steps to remove the VESA mount adapter:

Inspect the VESA mount adapter: Take a close look at the back of your Acer monitor to locate the VESA mount adapter. It is usually a plate or bracket with multiple screw holes arranged in a square or rectangular pattern.
Identify the screws or fasteners: Look for screws or fasteners that are securing the VESA mount adapter to the back of the monitor. Depending on the model, there may be two or four screws.
Use the appropriate tool: Based on your observations, choose the appropriate tool such as a screwdriver or Allen wrench to remove the screws. Ensure that the tool fits securely to prevent any damage to the screws or the VESA mount adapter.
Loosen and remove the screws: Apply gentle but consistent pressure on the screws to loosen them. Once they are loosened, carefully remove them from the VESA mount adapter.
Detach the VESA mount adapter: With the screws removed, you should be able to detach the VESA mount adapter from the back of the monitor. Hold it securely while doing this to avoid any accidental drops or damage.

Once the VESA mount adapter is removed, set it aside in a safe place. If you plan to mount the monitor on a different stand or wall mount, keep the VESA mount adapter for future use. Otherwise, you can store it for safekeeping or dispose of it responsibly.

Now that you have successfully removed the VESA mount adapter, the stand is fully detached from your Acer monitor. If you wish to reattach the stand in the future, you can refer to the user manual or manufacturer’s instructions for proper installation.

Reattaching the base (optional)

If you opted to remove the base from your Acer monitor but later decide to reattach it, the process is relatively simple. Follow these steps to reattach the base:

Find the screw holes: Look for the screw holes on the bottom of the monitor where the base was originally attached. These holes are usually marked or labeled for easy identification.
Align the base: Line up the base with the screw holes, ensuring that it is properly oriented and facing the correct direction. The base should fit flush against the bottom of the monitor.
Insert and tighten the screws: Insert the screws into the screw holes and use a screwdriver or appropriate tool to tighten them securely. Take care not to overtighten the screws, as this may damage the monitor or the base.

Once the screws are securely tightened, give the base a gentle tug to ensure it is firmly attached to the monitor. It should not wiggle or feel loose. If the base feels unstable, double-check that the screws are tightened properly.

Reattaching the base is completely optional and depends on your personal preference and needs. If you prefer to use an alternative stand or wall mount, you can skip this step and proceed accordingly.

Now that the base has been reattached (if desired), you can reconnect the monitor to the power source and cables, and begin enjoying your Acer monitor with a stable and secure stand.

Tips and precautions

As you remove the stand from your Acer monitor, it’s important to keep the following tips and precautions in mind to ensure a smooth and safe process:

Read the user manual: Before starting the removal process, refer to the user manual or manufacturer’s instructions specific to your Acer monitor model. This will provide you with important details and any specific steps or precautions to take.
Work in a clean and well-lit area: Choose a clean and well-lit work area to perform the removal. This will help you see any small parts or screws, as well as prevent dust or debris from getting inside the monitor.
Take pictures or notes: If you are unsure about the steps involved or need a reference for reassembly, consider taking pictures or notes at each stage of the removal process. This will help guide you when it’s time to reattach the stand or refer back to the original configuration if needed.
Handle the monitor with care: Throughout the removal process, handle the monitor with care and avoid putting excessive pressure or force on any components. This will help prevent accidental damage to the screen or internal parts.
Keep track of screws and small parts: When removing screws or small parts, keep them in a safe place or use a labeled container to prevent them from getting lost. This will make reassembly easier and ensure that all necessary components are accounted for.
Follow proper ergonomics: When using an alternative stand or wall mount, consider ergonomics to ensure a comfortable viewing experience. Adjust the height, tilt, and angle of the monitor to reduce strain on your neck and eyes.
Double-check connections: After reattaching the monitor to a new stand or wall mount, check that all cables and connections are secure and properly plugged in. Loose or incorrect connections can lead to display issues or other problems.
Seek professional assistance if needed: If you are unsure about removing the stand or encounter any difficulties during the process, it’s best to seek professional assistance from a qualified technician or contact Acer customer support for guidance.

By following these tips and taking necessary precautions, you can safely remove and reassemble the stand on your Acer monitor, providing you with more flexibility in positioning and enhancing your viewing experience.