Bypassing Setup Wizard on Moto G: Step-by-Step Guide

Enable Developer Options

Enabling Developer Options on your Moto G is the first step towards bypassing the setup wizard. This process allows you to access advanced settings and debugging features that are typically hidden from regular users. Here's a step-by-step guide to help you enable Developer Options on your device:

Access Settings: To begin, navigate to the "Settings" app on your Moto G. This can usually be found in the app drawer or by swiping down from the top of the screen and tapping the gear icon.
About Phone: Scroll down to the bottom of the Settings menu and select "About phone." This option is often located at the end of the list.
Build Number: In the "About phone" section, locate the "Build number" entry. Tap on "Build number" seven times in quick succession. As you do this, you'll see a message indicating that you are now a developer.
Enter PIN/Password: If prompted, enter your device's PIN or password to confirm your action. This step is necessary to ensure that only authorized users can access Developer Options.
Developer Options: Once you've successfully tapped the "Build number" seven times and entered your PIN or password, you can return to the main Settings menu. Scroll down, and you should now see "Developer options" listed above "About phone."

By following these steps, you have successfully enabled Developer Options on your Moto G. This will grant you access to a range of advanced settings and debugging tools that are essential for bypassing the setup wizard and customizing your device to suit your specific needs.

Enable USB Debugging

Enabling USB debugging on your Moto G is a crucial step in the process of bypassing the setup wizard and gaining greater control over your device. USB debugging allows your phone to communicate with the Android SDK (Software Development Kit) and other development tools, enabling advanced operations such as rooting, installing custom ROMs, and debugging applications. Here's a detailed guide on how to enable USB debugging on your Moto G:

Access Developer Options: As mentioned earlier, you need to have Developer Options enabled on your device. If you haven't done so already, refer to the previous section for instructions on how to enable Developer Options.
Open Developer Options: Once Developer Options are enabled, go back to the main Settings menu and scroll down to find "Developer options." Tap on it to access the advanced settings.
Enable USB Debugging: Within the Developer Options menu, locate the "USB debugging" option. It is usually found towards the top of the list. Toggle the switch next to "USB debugging" to enable this feature.
Grant Permission: When you toggle the USB debugging switch, a prompt may appear asking for your confirmation to allow USB debugging. Select "OK" to grant permission for your computer to communicate with your Moto G via USB debugging.
Connect to Computer: To ensure that USB debugging is functioning correctly, connect your Moto G to your computer using a USB cable. If this is your first time connecting your device to the computer for debugging, you may be prompted to authorize the connection on your phone. Follow the on-screen instructions to complete the authorization process.

By following these steps, you have successfully enabled USB debugging on your Moto G. This feature opens up a world of possibilities for advanced users and developers, allowing for seamless interaction between your device and development tools. With USB debugging enabled, you can now proceed to the next steps in bypassing the setup wizard and customizing your Moto G to your preferences.

Remember, while USB debugging offers powerful capabilities, it's important to exercise caution and ensure that you only execute commands and operations that you fully understand. With great power comes great responsibility, and by leveraging USB debugging responsibly, you can unlock the full potential of your Moto G.

Connect Moto G to Computer

Once you have enabled USB debugging on your Moto G, the next step is to establish a connection between your device and your computer. This connection is essential for executing commands and operations that will allow you to bypass the setup wizard and customize your device according to your preferences.

To connect your Moto G to your computer, follow these straightforward steps:

USB Cable: Begin by locating a suitable USB cable that is compatible with your Moto G. Most modern smartphones, including the Moto G, utilize a standard USB Type-C or micro-USB connector for charging and data transfer. Ensure that the USB cable is in good condition and capable of transmitting data.
Computer Port: Identify an available USB port on your computer where you can connect the USB cable. Depending on the design of your computer, the USB ports may be located on the front, back, or sides. Choose a port that is easily accessible and provides a stable connection.
Moto G Port: With the USB cable in hand, locate the corresponding port on your Moto G. The port is typically located at the bottom or top of the device, depending on the model. Carefully insert the USB cable into the port, ensuring that it is securely connected.
Connection Notification: Upon connecting your Moto G to the computer via the USB cable, your device may display a notification indicating that it is now charging or connected as a media device. This notification confirms that the physical connection between your Moto G and the computer has been established.
Authorization Prompt (if applicable): In some cases, when you connect your Moto G to a computer for the first time, you may receive a prompt on your device asking for permission to allow the connection. This prompt is a security measure to ensure that only trusted computers can access your device. If prompted, follow the on-screen instructions to authorize the connection.

By successfully connecting your Moto G to your computer, you have laid the groundwork for the subsequent steps in the bypassing process. This connection enables seamless communication between your device and the computer, allowing you to execute ADB commands and perform advanced operations to bypass the setup wizard and customize your Moto G to your liking.

Now that your Moto G is connected to your computer, you are ready to proceed with the next steps in the bypassing process, which involve installing ADB and Fastboot, opening the command prompt, entering ADB commands, and ultimately rebooting your Moto G to complete the bypass. This connection serves as the bridge that facilitates the exchange of commands and data between your device and the computer, empowering you to take full control of your Moto G's customization and functionality.

Install ADB and Fastboot

Installing ADB (Android Debug Bridge) and Fastboot is a pivotal step in the process of bypassing the setup wizard on your Moto G. These two command-line tools are essential for executing advanced commands and operations that enable you to customize and modify various aspects of your device's software. ADB facilitates communication between your computer and your Moto G, allowing you to send commands to the device, while Fastboot is primarily used for flashing custom recoveries, kernels, and other system modifications. Here's a comprehensive guide on how to install ADB and Fastboot on your computer:

Download Android SDK Platform Tools: Begin by obtaining the Android SDK Platform Tools package, which includes ADB and Fastboot. You can download this package directly from the official Android Developers website. Ensure that you select the appropriate version for your operating system, whether it's Windows, macOS, or Linux.
Extract the Platform Tools: Once the download is complete, extract the contents of the Platform Tools package to a location on your computer that is easily accessible. You can create a dedicated folder for ADB and Fastboot, or simply extract the files to a directory of your choice.
Add Platform Tools to System Path (Optional): For convenience, you may choose to add the directory containing ADB and Fastboot to your system's PATH environment variable. This allows you to execute ADB and Fastboot commands from any location in the command prompt or terminal without specifying the full path to the tools.
Verify Installation: To ensure that ADB and Fastboot are installed correctly, open a command prompt or terminal window and navigate to the directory where the Platform Tools are located. Then, execute the following commands:
- adb version: This command should display the version of ADB installed on your computer.
- fastboot devices: If you have your Moto G connected to the computer in fastboot mode, this command should list the device, confirming that Fastboot is functioning properly.

By following these steps, you have successfully installed ADB and Fastboot on your computer, laying the groundwork for the subsequent stages of bypassing the setup wizard on your Moto G. With ADB and Fastboot at your disposal, you are equipped to execute advanced commands and operations that will enable you to customize your device, install custom ROMs, and perform various system modifications. This installation represents a crucial milestone in your journey to unlock the full potential of your Moto G and tailor it to your specific preferences.

Open Command Prompt

Once you have successfully installed ADB and Fastboot on your computer, the next step in bypassing the setup wizard on your Moto G involves opening the command prompt or terminal window. This is where you will execute a series of ADB commands to interact with your device and carry out the necessary operations to bypass the setup wizard and customize your Moto G according to your preferences.

To open the command prompt on Windows, you can follow these steps:

Search for Command Prompt: Click on the Start button or press the Windows key, then type "Command Prompt" in the search bar. Select the Command Prompt app from the search results to open it.
Navigate to ADB and Fastboot Directory: If you have added the directory containing ADB and Fastboot to your system's PATH environment variable during the installation process, you can open the command prompt from any location and directly execute ADB and Fastboot commands. If not, you will need to navigate to the directory where ADB and Fastboot are located using the cd command.
Open Command Prompt as Administrator (Optional): Depending on the specific ADB commands you intend to execute, you may need administrative privileges. In such cases, it's advisable to open the command prompt as an administrator to ensure that the commands are executed without any restrictions.

For macOS and Linux users, the process of opening a terminal window is relatively straightforward:

Access Terminal: On macOS, you can find the Terminal app in the "Applications" folder within the "Utilities" subfolder. Simply click on the Terminal icon to open the application.
Navigate to ADB and Fastboot Directory: Similar to Windows, if you have added the directory containing ADB and Fastboot to your system's PATH environment variable, you can directly execute ADB and Fastboot commands from any location within the terminal. Otherwise, use the cd command to navigate to the directory where ADB and Fastboot are located.
Execute Commands: Once the terminal window is open and you are in the appropriate directory, you can proceed to execute the necessary ADB commands to interact with your Moto G and initiate the bypassing process.

By opening the command prompt or terminal window and navigating to the directory containing ADB and Fastboot, you are poised to take the next crucial steps in bypassing the setup wizard on your Moto G. This stage marks the transition from preparation to action, as you are now ready to execute ADB commands that will enable you to bypass the setup wizard and unlock the full potential of your device.

Enter ADB Commands

With the command prompt or terminal window open and the directory containing ADB and Fastboot accessible, you are now ready to enter a series of ADB commands to interact with your Moto G and initiate the process of bypassing the setup wizard. These commands enable you to execute specific actions on your device, paving the way for customization and advanced modifications. Here's a detailed guide on entering ADB commands to bypass the setup wizard on your Moto G:

Check Device Connection: Before proceeding with ADB commands, it's essential to ensure that your Moto G is successfully connected to the computer via USB. In the command prompt or terminal, execute the following command:

adb devices

This command verifies the connection between your computer and Moto G. If your device is listed, it indicates that ADB recognizes and can communicate with your Moto G.
Bypass Setup Wizard: To bypass the setup wizard and gain access to the device's interface, you can use the following ADB command:

adb shell am start -n com.google.android.setupwizard/.SetupWizardTestActivity

This command initiates the setup wizard bypass process, allowing you to skip the initial setup steps and directly access the home screen or main interface of your Moto G.
Grant Permissions (if necessary): In certain scenarios, you may need to grant specific permissions to ensure smooth execution of the bypass process. To grant necessary permissions, execute the following command:

adb shell pm grant com.google.android.setupwizard android.permission.READ_PHONE_STATE

This command grants the required permission to the setup wizard, facilitating a seamless bypass process.
Reboot Device: After successfully bypassing the setup wizard, it's advisable to reboot your Moto G to ensure that all changes take effect. Execute the following command to reboot your device:

adb reboot

This command initiates a reboot of your Moto G, allowing the changes made through the bypass process to be fully implemented.

By entering these ADB commands in the command prompt or terminal window, you can effectively bypass the setup wizard on your Moto G and gain direct access to the device's interface. This process empowers you to customize your device according to your preferences, unlocking its full potential and enabling advanced modifications and customizations. With the setup wizard bypassed, you are now poised to explore the myriad possibilities for personalizing and optimizing your Moto G to suit your unique needs and preferences.

Reboot Moto G

After successfully bypassing the setup wizard and making the necessary customizations to your Moto G, the final step in the process involves rebooting the device. Rebooting, or restarting, your Moto G is essential to ensure that all the changes and modifications take effect, providing a seamless and optimized user experience.

To initiate the reboot process, you can execute the following ADB command in the command prompt or terminal window:

bash
adb reboot

This command triggers a reboot of your Moto G, prompting the device to shut down and then restart. Upon rebooting, your Moto G will apply the changes made during the setup wizard bypass and customization process, ensuring that the device operates according to your preferences and configurations.

Rebooting your Moto G serves as the final step in solidifying the modifications and customizations you have implemented. It allows the device to refresh its system and user interface, incorporating the changes you've made and ensuring that all components function optimally.

Additionally, a reboot can help resolve any lingering issues or inconsistencies that may arise during the setup wizard bypass and customization process. By restarting the device, you can ensure that it operates smoothly and efficiently, reflecting the personalized settings and modifications you've applied.

Furthermore, a reboot is beneficial for validating the success of the setup wizard bypass and customization, as it provides an opportunity to confirm that the device functions as intended after the modifications have been implemented.

In essence, rebooting your Moto G marks the culmination of the setup wizard bypass and customization process, affirming that the device operates according to your tailored specifications. It represents the final touch in ensuring that your Moto G is optimized to meet your individual needs and preferences, delivering a personalized and seamless user experience.

By executing the ADB reboot command, you finalize the setup wizard bypass and customization journey, allowing your Moto G to reflect your unique preferences and configurations.