How To Clean Dyson Round Brush Attachment

Gather Materials

Before you start cleaning your Dyson round brush attachment, it’s important to gather all the necessary materials. Having everything ready beforehand will make the process more efficient and ensure that you have everything you need to get the job done. Here are the materials you’ll need:

Bowl or sink
Warm water
Mild dish soap
Old toothbrush or small cleaning brush
Clean towel or paper towels

Make sure the bowl or sink you use is large enough to accommodate the entire brush attachment. It’s also good to use warm water for effective cleaning, but avoid using hot water that may damage the brush or the housing.

Using a mild dish soap is ideal as it will effectively remove dirt and grime without causing any damage. Avoid using harsh chemicals or cleaning agents as they can deteriorate the brush bristles or housing materials.

An old toothbrush or a small cleaning brush with stiff bristles will come in handy for scrubbing away debris and residue. The bristles should be firm enough to effectively remove dirt but soft enough so as not to damage the brush bristles or housing.

Finally, have a clean towel or paper towels ready to pat dry the brush attachment once it is cleaned. It’s important to ensure that the brush is completely dry before reattaching it to your Dyson vacuum to prevent any potential issues with dampness or mold.

Remove Hair and Debris

Before you can deep clean your Dyson round brush attachment, you’ll need to remove any hair and debris that may be tangled in the bristles. This step will help ensure that your cleaning efforts are more effective and prevent any clogs or blockages. Here’s how to do it:

Detach the brush attachment from your Dyson vacuum and hold it over a trash bin or sink.
Use your fingers or a pair of tweezers to carefully pull out any visible hair or debris from the bristles. Take your time and be thorough, making sure to remove everything you can see.
If there are stubborn clumps of hair that are difficult to remove, you can use a pair of scissors to carefully cut them out. Be cautious not to cut the bristles or damage the attachment while doing so.
Once you’ve removed as much hair and debris as possible, use a soft brush or a toothbrush to gently brush the bristles and dislodge any remaining particles.
Tap the attachment against a hard surface or shake it gently to release any loose hair or debris that may be trapped.
Inspect the brush attachment to ensure that it is completely free of hair and debris before moving on to the next step.

Removing hair and debris from your Dyson round brush attachment is an important first step in the cleaning process. It will not only improve the performance of your vacuum but also prevent any damage or blockages that may occur if the brush is not properly maintained. Once you’ve thoroughly removed all hair and debris, you’re ready to move on to the next step: soaking the attachment in warm, soapy water.

Soak in Warm, Soapy Water

Once you have removed all the hair and debris from your Dyson round brush attachment, it’s time to give it a thorough cleaning by soaking it in warm, soapy water. This step will help loosen any remaining dirt and grime, making it easier to scrub away later on. Follow these steps to soak your brush attachment:

Fill a bowl or sink with warm water. The water should be warm, but not too hot, as excessive heat can damage the bristles or housing.
Add a few drops of mild dish soap to the water and give it a gentle swirl to create a soapy solution. Avoid using harsh chemicals or cleaning agents, as they can be abrasive and cause damage.
Submerge the brush attachment in the soapy water, making sure that it is fully immersed. Gently agitate the water to ensure that the soapy solution reaches all parts of the brush.
Let the brush attachment soak for about 15 to 30 minutes to allow the soap to break down any dirt or grime.

The warm, soapy water will work to loosen and dissolve any stubborn particles that may be stuck on the brush bristles or housing of your Dyson attachment. As it soaks, the soap will penetrate the bristles and help in the cleaning process, preparing the brush for a deeper scrubbing in the next step.

While the brush attachment is soaking, it’s a good time to clean any other detachable parts of your Dyson vacuum. You can soak them in a separate bowl of warm, soapy water to remove any accumulated dirt or dust. This will ensure that all components are thoroughly cleaned and ready for use.

After the appropriate soaking time has passed, you’re ready to move on to the next step: scrubbing the brush bristles to remove any remaining dirt and grime.

Scrub the Brush Bristles

Now that your Dyson round brush attachment has soaked in warm, soapy water, it’s time to give the bristles a thorough scrubbing to remove any remaining dirt and grime. By properly cleaning the brush bristles, you’ll ensure optimal performance and maintain the longevity of your attachment. Follow these steps to scrub the brush bristles:

Remove the brush attachment from the soapy water and prepare a clean bowl or sink with warm water for rinsing.
Dip an old toothbrush or a small cleaning brush into the warm water to moisten the bristles.
Using the moistened toothbrush or cleaning brush, gently scrub the bristles of the Dyson attachment in a back-and-forth motion. Pay close attention to any areas with stubborn dirt or residue.
Continue scrubbing until all visible dirt and grime have been loosened and removed from the bristles. Be careful not to scrub too aggressively or use excessive force, as this may damage the bristles or the attachment itself.
If necessary, you can add a small amount of mild dish soap to the toothbrush or cleaning brush to create a soapy lather. This can help in removing any tougher stains or buildup.
Periodically rinse the brush attachment under warm running water to remove the loosened debris and soap residue. Repeat the scrubbing and rinsing process until the bristles are clean and free from any remaining dirt or grime.

By scrubbing the brush bristles, you are ensuring that any deep-seated dirt or residue is removed, leaving your Dyson round brush attachment fresh and ready for use. Once the bristles are clean and free of debris, it’s time to move on to the next step: rinsing and drying the attachment thoroughly.

Rinse and Dry Thoroughly

After scrubbing the brush bristles of your Dyson round brush attachment, it’s important to rinse it thoroughly to remove any remaining soap residue and ensure a clean finish. Additionally, drying the attachment properly is crucial to prevent any potential issues with dampness or mold. Follow these steps to rinse and dry your brush attachment:

Hold the brush attachment under warm running water, ensuring that all the bristles are thoroughly rinsed. Rotate the attachment as you rinse to ensure that all sides are covered.
Continue rinsing until the water runs clear and free from any soap residue or dirt.
Shake the attachment gently to remove any excess water.
Pat dry the attachment with a clean towel or paper towels. Make sure to remove as much moisture as possible to prevent any potential issues with dampness or mold.
Leave the brush attachment in a well-ventilated area to air dry completely before reassembling or using it again. This will help ensure that it is entirely dry and ready for use.

Proper rinsing and drying are essential to maintain the hygiene and functionality of your Dyson round brush attachment. Ensuring that there is no residual soap or moisture will prevent any unwanted odors or potential damage to your vacuum cleaner. Once the brush attachment is thoroughly dry, it’s time to move on to the next step: cleaning the brush housing.

Clean the Brush Housing

While you may have focused on cleaning the bristles of your Dyson round brush attachment, it’s equally important to clean the brush housing. Over time, dust, dirt, and debris can accumulate in this area, impacting the overall performance of the attachment. Follow these steps to clean the brush housing:

Inspect the brush housing and use a small cleaning brush or an old toothbrush to loosen any visible dirt or debris. Gently brush along the sides and bottom of the housing to dislodge any particles.
If there are any stubborn residue or grime remaining, you can dampen the cleaning brush or toothbrush with a small amount of mild dish soap and water. Scrub gently to remove the tough stains.
For hard-to-reach areas in the brush housing, you can use a Q-tip or cotton swab to carefully clean and remove any remaining dirt.
Rinse the brush housing under warm running water to remove the loosened dirt and soap residue.
Pat the housing dry with a clean towel or paper towels to remove excess moisture.
Ensure that the brush housing is completely dry before reassembling the attachment or using it again.

Cleaning the brush housing not only improves the performance of your Dyson round brush attachment, but it also helps to maintain its longevity. By ensuring that the housing is free from dirt and debris, you can continue to enjoy optimal cleaning results with your vacuum.

Once the brush housing is clean and dry, you are ready to move on to the next step: putting the attachment back together.

Put the Attachment Back Together

Now that you have thoroughly cleaned every part of your Dyson round brush attachment, it’s time to put it back together. Follow these simple steps to ensure that the attachment is assembled properly and ready for use:

Take the clean brush housing and align it with the base of the brush attachment. Make sure the slots and grooves line up correctly.
Gently push the brush housing into place until it clicks or locks securely. Ensure that it is firmly attached and won’t come loose during use.
If your attachment has any clips or fasteners, secure them to hold the brush housing in place.
Double-check that the brush bristles are aligned properly and facing the right direction. Adjust if necessary.
If there are any additional components or accessories that go with your specific attachment, attach them according to the manufacturer’s instructions.
Your Dyson round brush attachment is now reassembled and ready to be attached back to your vacuum cleaner.

It’s always a good idea to test the attachment after reassembly to ensure that it is functioning properly. Attach it securely to your Dyson vacuum and turn it on to confirm that the brush is spinning and working as expected.

By following these steps and properly reassembling your Dyson round brush attachment, you can ensure that it is in excellent condition and ready to tackle your next cleaning task with ease.