How To Change Brita Water Filter

Gather the Necessary Materials

Before you begin the process of changing your Brita water filter, it’s important to gather all the necessary materials. Having everything on hand will help you complete the task smoothly and efficiently. Here are the items you’ll need:

Brita Water Pitcher: Make sure you have the correct model of Brita pitcher that is compatible with the filter you are replacing. Different pitchers have different filter sizes and shapes, so it’s essential to have the right one.
New Brita Water Filter: Purchase the appropriate replacement filter for your Brita pitcher. Filters typically need to be replaced every two to three months, depending on your water usage and the quality of your tap water.
Clean Cloth or Paper Towels: You’ll need these to wipe down the pitcher and filter during the change process.
Dish Soap: Having dish soap on hand will allow you to thoroughly clean the pitcher before inserting the new filter.
Water: Make sure you have access to clean, preferably cold, water to rinse the pitcher and prime the new filter.

Gathering these materials ahead of time will ensure a seamless and hassle-free filter change. It’s always better to be prepared and have everything you need within reach.

Prepare the Water Pitcher

Before replacing the Brita water filter, it’s important to properly prepare the water pitcher. Follow these steps to ensure a clean and ready-to-use pitcher:

Empty the Pitcher: Start by pouring out any remaining water from the pitcher. Discard the old filter if it’s still in place.
Take Apart the Pitcher: If your Brita pitcher has components that can be separated, such as the lid and reservoir, detach them carefully. This will make it easier to clean and replace the filter.
Wash the Pitcher: Use a clean cloth or paper towel soaked in mild dish soap and water to wipe down the pitcher. Pay close attention to any areas where mineral deposits or residue may have accumulated, such as the spout or handle. Rinse the pitcher thoroughly with water to remove any soap residue.
Inspect the Pitcher: While cleaning the pitcher, check for any cracks or damages that may affect its functionality. If you notice any issues, it may be best to replace the pitcher entirely to ensure your water remains filtered properly.

Preparing the water pitcher ensures a fresh start with the new filter. This step removes any impurities or residue that may have built up over time, ensuring that your filtered water tastes clean and pure.

Remove the Old Filter

Now that you’ve prepared the water pitcher, it’s time to remove the old Brita water filter. Follow these simple steps:

Locate the Filter: The filter is usually located at the top of the pitcher, near the pour spout. Identify the position of the old filter inside the reservoir.
Grasp the Old Filter: Using a firm grip, carefully grab hold of the old filter with your fingers. Apply gentle pressure and twist counterclockwise to release it from the pitcher.
Dispose of the Old Filter: Once you have removed the old filter, discard it in the appropriate trash bin. It’s important to replace filters regularly to maintain the effectiveness of your Brita pitcher.

Removing the old filter is a crucial step in the process of changing your Brita water filter. By disposing of the old filter, you make way for a fresh, clean replacement that will provide you with the best quality filtered water.

Clean the Pitcher

After removing the old filter, it’s essential to clean the water pitcher before inserting the new filter. Follow these steps to ensure a clean and ready-to-use pitcher:

Wash the Pitcher: Use warm water and mild dish soap to clean the entire pitcher, including the inside and outside surfaces. Gently scrub any residue or stains with a non-abrasive sponge or cloth. Rinse the pitcher thoroughly to remove any soap residue.
Pay Attention to Difficult Areas: Pay extra attention to the lid, spout, and handle, as these areas tend to accumulate dirt and debris. Use a small brush, such as a toothbrush, to reach tight spots and remove any build-up.
Dry the Pitcher: After washing and rinsing the pitcher, thoroughly dry it with a clean cloth or paper towel. Ensuring that the pitcher is completely dry will help prevent the growth of bacteria or mold.

Cleaning the pitcher is crucial to maintain the overall hygiene and performance of your Brita water filter. By removing any impurities or residue, you ensure that your filtered water will be fresh and clean, free from any unwanted tastes or odors.

Insert the New Filter

With the water pitcher cleaned and ready, it’s time to insert the new Brita water filter. Follow these steps for a smooth and successful installation:

Prepare the Filter: Before inserting the new filter, it’s recommended to soak it in cold water for a few minutes. This helps activate the filter and remove any loose carbon particles.
Position the Filter: Locate the filter cartridge slot in the pitcher. Insert the new filter into the slot, ensuring it fits securely and snugly.
Align and Lock: Rotate the filter clockwise until it locks into place. Make sure the filter is properly aligned with the pitcher to ensure a tight seal.
Check for Secure Fit: Gently tug on the filter to ensure it is securely locked in and will not come loose during use.

Inserting the new filter is a crucial step in maintaining the purity and quality of your filtered water. A properly installed filter will effectively remove impurities and provide you with clean, great-tasting water for a refreshing drinking experience.

Prime the Filter

After inserting the new filter, it’s important to prime it before using the pitcher for the first time. Priming helps activate the filter and removes any loose carbon particles. Follow these steps to prime the filter:

Fill the Sink or a Container: Place the pitcher under a running faucet or fill a sink or container with cold water.
Submerge the Filter: Fully submerge the filter in the water, ensuring it is completely covered.
Let Water Flow: Turn on the faucet or gently pour water into the sink or container. Let the water flow through the filter for at least 15 seconds.
Shake the Filter: Remove the filter from the water, give it a few gentle shakes to dislodge any remaining carbon particles, and place it back into the pitcher.

Priming the filter is crucial to ensure optimal performance and filtration effectiveness. It helps to remove any loose particles and activates the filter, allowing it to provide clean and purified water for drinking and other purposes.

Fill the Pitcher with Water

After priming the filter, it’s time to fill the water pitcher to start enjoying clean and fresh filtered water. Let’s go through the steps:

Open the Lid: Lift or remove the lid of the Brita water pitcher to access the reservoir.
Position the Pitcher: Place the pitcher under a faucet or any other source of clean, cold water.
Pour the Water: Slowly pour the desired amount of water into the pitcher. Ensure that you do not overfill it beyond the maximum fill line.
Allow the Water to Pass Through the Filter: As you pour the water, it will pass through the filter, which will remove impurities and improve the taste and quality of the water.

Filling the water pitcher with clean water is the final step in the process of changing the Brita water filter. Once filled, you can now enjoy filtered water that is free from chlorine taste, odor, and other common contaminants.

Enjoy Clean and Fresh Filtered Water

Now that you have completed the process of changing your Brita water filter and have filled the pitcher with fresh water, it’s time to enjoy clean and refreshing filtered water. Here are a few things to keep in mind:

Refrigerate if Desired: For chilled water, place the filled pitcher in the refrigerator to cool before serving.
Stay Hydrated: Make it a habit to drink plenty of water throughout the day to stay hydrated and maintain overall well-being. The convenience of having a Brita water pitcher means you can have clean and fresh filtered water readily available at home or office.
Monitor Filter Replacement: Keep track of the recommended filter replacement schedule provided by Brita. Regularly replacing the filter ensures that your water stays consistently filtered and free from impurities.
Explore Flavor Enhancements: Experiment with adding slices of lemon, cucumber, or a few mint leaves to infuse your filtered water with natural flavors.

By changing your Brita water filter regularly and following the proper maintenance steps, you can continue to enjoy clean and fresh filtered water, free from any unwanted tastes or odors. Filtered water not only helps to quench your thirst, but it also promotes a healthier lifestyle.