Rooting Xiaomi 3S In English: A Quick Tutorial

Preparing Your Xiaomi 3S for Rooting

Before diving into the world of rooting, it's crucial to prepare your Xiaomi 3S for the process. Rooting your device grants you elevated access, allowing you to customize and optimize its performance. However, this procedure comes with risks, so it's essential to take the necessary precautions.

1. Backup Your Data: The first step in preparing your Xiaomi 3S for rooting is to back up all your important data, including photos, videos, contacts, and any other files you can't afford to lose. While the rooting process typically doesn't erase your data, it's always better to be safe than sorry.

2. Charge Your Device: Ensure that your Xiaomi 3S has an adequate battery charge before initiating the rooting process. A fully charged battery will prevent any unexpected shutdowns during the procedure, which could potentially harm your device.

3. Enable USB Debugging: To enable USB debugging, navigate to the 'Settings' menu on your Xiaomi 3S, tap on 'About Phone,' and then tap on the 'Build Number' seven times to enable Developer Options. Once done, go back to the main 'Settings' menu, select 'Developer Options,' and enable 'USB Debugging.'

4. Install Necessary Drivers: It's important to have the appropriate USB drivers installed on your computer to ensure seamless communication between your Xiaomi 3S and the rooting software. You can download and install the Xiaomi USB drivers from the official Xiaomi website.

5. Research: Take the time to research the rooting process thoroughly. Familiarize yourself with the potential risks and benefits of rooting your Xiaomi 3S. Understanding the process will empower you to make informed decisions and troubleshoot any issues that may arise.

By meticulously preparing your Xiaomi 3S for rooting, you set the stage for a smooth and successful rooting experience. Taking these initial steps not only safeguards your data but also equips you with the knowledge and resources to navigate the rooting process with confidence.

Unlocking the Bootloader

Unlocking the bootloader is a pivotal step in the process of rooting your Xiaomi 3S. The bootloader acts as a security checkpoint, restricting the device from booting into unauthorized software. By unlocking the bootloader, you gain the freedom to install custom ROMs and root your device, unleashing its full potential.

Before You Begin

Before delving into the bootloader unlocking process, it's essential to understand that this action will void the warranty of your Xiaomi 3S. Additionally, unlocking the bootloader will erase all data on your device, so it's crucial to have already backed up your important files.

Step-by-Step Guide

1. Enable Developer Options: On your Xiaomi 3S, navigate to the 'Settings' menu and tap on 'About Phone.' Locate the 'MIUI version' and tap on it seven times to enable Developer Options.

2. Enable OEM Unlocking: Once you have enabled Developer Options, go back to the main 'Settings' menu and select 'Additional Settings.' Inside, you will find 'Developer Options.' Enter this menu and enable 'OEM unlocking.'

3. Request Unlock Permission: Visit the official Xiaomi website and navigate to the 'Mi Unlock' page. Sign in with your Mi account and request bootloader unlock permission. This process may take a few days, and you will receive a confirmation once approval is granted.

4. Download Mi Unlock Tool: After receiving permission, download the Mi Unlock Tool on your computer. Install the tool and follow the on-screen instructions to complete the setup.

5. Enter Fastboot Mode: Power off your Xiaomi 3S and then press and hold the 'Volume Down' and 'Power' buttons simultaneously to enter Fastboot mode.

6. Connect Your Device: Using a USB cable, connect your Xiaomi 3S to your computer while it's in Fastboot mode.

7. Unlock the Bootloader: Launch the Mi Unlock Tool on your computer and sign in with the same Mi account used to request permission. Follow the tool's instructions to initiate the bootloader unlocking process. Once the process is complete, your device's bootloader will be unlocked, and your Xiaomi 3S will reboot.

Final Thoughts

Unlocking the bootloader of your Xiaomi 3S marks a significant milestone in your journey towards customization and optimization. It opens the door to a world of possibilities, allowing you to explore custom ROMs, enhance performance, and truly make the device your own. However, it's crucial to approach this process with caution and meticulous attention to detail, as any missteps could potentially lead to irreversible consequences. By adhering to the prescribed steps and exercising patience, you pave the way for a successful bootloader unlocking experience, setting the stage for the next phase of your Xiaomi 3S rooting adventure.

Installing TWRP Recovery

Installing TWRP (Team Win Recovery Project) recovery on your Xiaomi 3S is a critical step in the rooting process, as it provides a secure environment for flashing custom ROMs, creating backups, and managing system-level tasks. TWRP offers a user-friendly interface and robust functionality, empowering you to take full control of your device's software. Before proceeding with the installation, ensure that you have unlocked the bootloader of your Xiaomi 3S and backed up all essential data.

Step-by-Step Guide

1. Download TWRP Image: Begin by downloading the TWRP recovery image specifically designed for the Xiaomi 3S from the official TWRP website. Ensure that you select the correct version to avoid compatibility issues.

2. Enable USB Debugging: On your Xiaomi 3S, navigate to 'Settings,' tap on 'About Phone,' and then tap on 'Build Number' seven times to enable Developer Options. Return to the main 'Settings' menu, select 'Developer Options,' and enable 'USB Debugging.'

3. Connect Your Device: Using a USB cable, connect your Xiaomi 3S to your computer. Ensure that your device is recognized by the computer and that USB debugging is functioning properly.

4. Boot into Fastboot Mode: Power off your Xiaomi 3S, then press and hold the 'Volume Down' and 'Power' buttons simultaneously to enter Fastboot mode.

5. Open Command Prompt or Terminal: On your computer, navigate to the folder where the TWRP recovery image is located. Open a command prompt or terminal window in this directory.

6. Flash TWRP Recovery: In the command prompt or terminal, enter the following command to flash the TWRP recovery image to your Xiaomi 3S:

   fastboot flash recovery <twrp_filename.img>

   Replace <twrp_filename.img> with the actual filename of the TWRP recovery image.

7. Reboot into TWRP: Once the flashing process is complete, use the volume keys on your Xiaomi 3S to navigate to 'Recovery Mode' in the Fastboot menu, then press the power button to reboot into TWRP recovery.

8. Verify Installation: Upon entering TWRP recovery, ensure that the installation was successful by navigating through the TWRP interface. If TWRP loads without any issues, the installation is successful.

Embracing the Potential

By installing TWRP recovery on your Xiaomi 3S, you have unlocked a realm of possibilities for customization and optimization. TWRP provides a secure platform for exploring custom ROMs, creating backups, and fine-tuning your device's performance. This pivotal step sets the stage for the final phase of the rooting process, empowering you to harness the full potential of your Xiaomi 3S.

Rooting Your Xiaomi 3S

Rooting your Xiaomi 3S is the culmination of a journey towards unlocking its full potential. By gaining root access, you attain the ability to delve into the core of the device's operating system, enabling advanced customization and optimization. However, it's essential to approach the rooting process with caution and thorough understanding, as it involves elevated privileges and inherent risks.

Step-by-Step Guide

1. Download Necessary Files: Begin by downloading the Magisk zip file, which is a popular tool for rooting Android devices. Ensure that you have the appropriate version compatible with your Xiaomi 3S model.

2. Transfer Magisk Zip to Device: Connect your Xiaomi 3S to your computer using a USB cable and transfer the downloaded Magisk zip file to the device's internal storage. Once the file transfer is complete, disconnect the USB cable.

3. Boot into TWRP Recovery: Power off your Xiaomi 3S, then press and hold the 'Volume Up' and 'Power' buttons simultaneously to enter TWRP recovery mode.

4. Flash Magisk Zip: In TWRP recovery, select 'Install' and navigate to the location where the Magisk zip file is stored. Select the Magisk zip file and swipe to flash it. This process installs Magisk and grants root access to your Xiaomi 3S.

5. Reboot System: After the flashing process is complete, select 'Reboot' and then 'System' to restart your Xiaomi 3S.

6. Verify Root Access: Upon rebooting, you can verify the successful rooting of your Xiaomi 3S by checking for the presence of the Magisk Manager app in your app drawer. The presence of this app indicates that your device has been successfully rooted.

Embracing Root Access

Rooting your Xiaomi 3S opens a realm of possibilities for customization, performance enhancements, and the installation of powerful root-enabled apps. With root access, you can optimize battery performance, remove bloatware, and explore a myriad of advanced customization options. It's important to exercise caution and discretion when utilizing root privileges, as improper modifications can potentially compromise the stability and security of your device.

By completing the rooting process, you have embarked on a journey towards harnessing the full potential of your Xiaomi 3S. Root access empowers you to tailor your device to suit your preferences, amplifying its capabilities and unleashing a world of innovation and personalization.

Rooting your Xiaomi 3S represents a significant milestone, marking the beginning of a new chapter in your device's evolution. It's a testament to your willingness to explore the depths of Android customization and optimization, setting the stage for a truly personalized and empowered smartphone experience.